488490
21
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
21
4. Appendices
Pitch bend
This is a Pitch shifter that uses the pedal to control the pitch.
If you use this effect in a program where the MODULA-
TION effect block is on, the MODULATION effect block
will automatically be turned off.
PITCH BEND P BEND
Knob 1 TIME Adjust the delay time.
Knob 2
FEEDBACK
Adjust the amount of feedback
(delay repeats).
Knob 3 PITCH Adjust the amount of pitch change.
Knob 4 FINE Make fine adjustments to the amount of
pitch change.
Knob 5 MIX Adjust the mix amount of the effect. With
a setting of 10, only the effect sound will
be output.
Ring modulator
This effect multiplies the original sound with a sine wave to
produce bell-like effects. The cleanest results will be produced if
you use the neck pickup of your guitar, turn down the tone, and
pluck the string near the twelfth fret.
If you use this effect in a program where the MODULA-
TION effect block is on, the MODULATION effect block
will automatically be turned off.
RING MOD RINGMOD
This is a ring modulator that lets you use the pedal to control
the frequency.
Knob 3 PITCH Adjust the tone when the pedal is
advanced.
Delay
These effects mix a time-delayed sound with the original sound
to add depth and spaciousness to the sound.
If you use this effect in a program where the AMBIENCE
effect block is on, the AMBIENCE effect block will
automatically be turned off.
HOLD DELAY HOLDDLY
This will normally function as a delay, but when the pedal is
advanced all the way forward to press the switch, the pedal
LED will light and the sound will be held (the delay sound will
continue to be heard). Since you can use the pedal to control
the input level to the delay, you can easily produce special
effects such as sound-on-sound.
TAP DELAY TAP DLY
This is a tap tempo delay that allows you to set the delay
tempo by pressing the pedal switch twice. While the tempo is
being specified, the pedal LED will light.
Knob 1 TIME Adjust the delay time.
Knob 2
FEEDBACK
Adjust the feedback amount
(delay repeats).
Knob 3 TONE Adjust the tone of the effect sound.
Knob 4 ——— ————
Knob 5 MIX Adjust the mix amount of the effect
sound.
Sample and play
If you use this effect in a program where the AMBIENCE
effect block is on, the AMBIENCE effect block will
automatically be turned off.
SAMPLE&PLAY S+PLAY
This allows approximately 8 seconds of recording. By using the
reverse setting, you can produce special “scratch” effects.
1. Press the expression pedal all the way to enter record-
ready mode. The pedal LED will blink.
2. Play a phrase etc. on your guitar. Recording will begin
automatically , and the pedal LED will light.
3. When the recording time specified by TIME has elapsed,
recording will end and the pedal LED will not be lit.
Alternatively, you can stop recording before the specified
recording time has elapsed by pressing the pedal all the
way (i.e., pressing the pedal switch).
To re-do the recording, repeat the procedure from step 1.
During recording, you can also return the pedal and then
press it again to stop recording and begin playback.
4. Operate the expression pedal. When you advance the
pedal, the recorded phrase will playback. If you have set
REVERSE to x1x8, returning the pedal will cause the
sound to playback in reverse at the specified speed. If
you set REVERSE to OFF, the sound will only playback
forward. With a setting of LP1 or LP2, advancing the
pedal will playback the sound as a repeating loop. When
you return the pedal and then advance the pedal again,
playback will begin from the beginning.
Recording will not begin unless you play your guitar
louder than the threshold.
The recording sound will be erased when you enter
Phrase Trainer mode or when you turn off the power.
Knob 1 TIME Specify the sample time (recording time).
Knob 2 REVERSE OFF:When you press the pedal, the
sound will playback to the end and
then stop.
x1x8:
Press the pedal to playback, and
return the pedal to playback in
reverse.
LP1:Press the pedal to playback as a
loop, and return the pedal to stop.
LP2:Press the pedal to playback as a
loop, and return the pedal to
playback to the end and then stop.
Knob 3 ——— ————
Knob 4 ——— ————
Knob 5 MIX Adjust the output level of the sampled
sound.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Korg AX1000G bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Korg AX1000G in de taal/talen: Engels als bijlage per email.

De handleiding is 1,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info