570445
4
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
44
English
Use
Setting the power
Press the function button until the power indicator
comes on. The display shows “1600”.
Turn the setting dial clockwise to increase the power.
Turn the setting dial counterclockwise to decrease the
power.
Setting the temperature
Press the function button until the temperature
indicator comes on. The display shows “200°”.
Turn the setting dial clockwise to increase the
temperature.
Turn the setting dial counterclockwise to decrease the
temperature.
Setting the timer
Press the function button until the timer indicator
comes on. The display shows “00:00”.
Turn the setting dial clockwise to set the hours.
Turn the setting dial counterclockwise to set the
minutes (1-minute steps).
Press the function button to conrm or wait until the
display stops ashing.
At the end of the countdown, a beep will sound and
the device will go to standby mode.
To cancel the function:
Press the on/o button to go to standby mode. The
timer indicator goes o.
Press and hold the function button to resume
operation with the set power or temperature settings.
The timer indicator goes o.
Hints for use
Insert the mains plug into the wall socket. A beep will
sound and the indicators ash once. The on/o
indicator starts to ash. The device is in standby mode.
Place the cookware in the centre of the cooking zone.
Press the on/o button to switch on the device. The
on/o indicator lights continuously. The display shows
“----”.
Set the device according to your cooking requirements.
After use, press the on/o button to set the device to
standby mode. The on/o indicator starts to ash.
Remove the mains plug from the wall socket.
Allow the device to cool down completely.
Error codes
Description Solution
E0
Internal circuit error.
(1) Use suitable cookware.
(2) Switch o the device, allow
the device to cool down
completely and switch the
device on again.
E1
No cookware or unsuitable
cookware used.
E7
Top plate overheating.
E2
Internal overheating.
Contact the service centre.
E3
Overvoltage.
E4
Undervoltage.
E5
Open-circuit error or
short-circuit error
(top plate sensor).
E6
Open-circuit error or
short-circuit error
(IGBT sensor).
Cleaning and maintenance
Warning!
Before cleaning or maintenance, switch o the device,
remove the mains plug from the wall socket and wait
until the device has cooled down.
Do not use cleaning solvents or abrasives.
Do not immerse the device in water or other liquids.
Do not attempt to repair the device. If the device does
not operate correctly, replace it with a new device.
Clean the outside of the device using a soft, damp
cloth. If necessary, use a little neutral detergent.
Thoroughly dry the outside of the device with a clean,
dry cloth.
Clean the ventilation openings using a soft brush.
Technical data
Power settings
300 W / 600 W / 900 W / 1200 W /
1400 W / 1600 W / 1800 W / 2000 W
Temperature settings
60 °C / 80 °C / 100 °C / 120 °C
140 °C / 160 °C / 180 °C / 200 °C
Timer settings 1 minute ~ 11 hours / 59 minutes
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Konig Electronic KN-INDUC-20 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Konig Electronic KN-INDUC-20 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 1,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info