508609
3
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
3
Remove the batteries if you are not going to use the radio for a long time
Remove empty batteries immediately
Do not use old and new batteries together
TO USE AC ADAPTER
Connect the plug to the radio and the schuko plug to an AC wall outlet. The DC input is 4.5 V
outer + inner -.
CLOCK FUNCTION
1. To set the time press the “POWER” button to go into standby mode.
2. Press “TIME/SET/MEMORY” and use the “HOUR/+” and “MIN/-” to set the correct time.
3. After you are finished press the “TIME/SET/MEMORY BUTTON” again to save the settings.
4. Press “MODE” to view the time on the display.
RADIO OPERATION
1. Move the lock switch to the UP position.
2. Turn on the radio with the “POWER BUTTON”.
3. Adjust the volume with the “VOLUME +/-” button.
4. Select the desired band using the “BAND/WAKE” button.
5. Tune to the desired station using the “HOUR/+” or “MIN/-” buttons. The frequency is displayed on
the display.
6. To improve reception, move the antenna.
7. To switch off the radio use the “POWER BUTTON”.
HEADPHONE
If you want to listen via a headphone, lower the volume, connect the headphone and set the volume to
the desired level again.
NOTE: When the received signal is weak, or the batteries are low, the FM ST indicator may not show
up on the display, even though the sound can still be heard via the headphones.
AUTOMATIC TUNING
To automatically tune to the desired station press and hold “HOUR/+” or “MIN/-” for more than 2
seconds. The radio will then search for the next available station. For SW press the “METER” button
repeatedly to select a station.
DIRECT TUNING
To directly input the desired frequency, press the “ENTER” button and type in the frequency of the
desired station. Press “ENTER” to confirm.
PRESETS
This radio is able to store 40 preset stations, with a maximum of 10 on each band. When you are
listening to the station you want to store, follow these steps:
1. Press “TIME/SET/MEMORY”, MEMO will blink in the display.
2. Press a preset number (0-9).
3. Press the “TIME /SET/MEMORY” button again and the station will be stored.
NOTE: Storing a station needs to be completed in succession without any pauses.
To select a stored preset station, first select the desired band and then press the numerical key which
corresponds with the stored station.
ALARM SETTINGS
TO SET THE ALARM
1. Switch to standby mode.
2. Press the “BAND/WAKE” button repeatedly to select the desired alarm (OFF, BUZZ, RADIO).
3. Hold the “BAND/WAKE” button until the time starts flashing.
4. Set the desired alarm time using “HOUR/+” or “MIN/-” and press “BAND/WAKE” to confirm.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Konig Electronic HAV-PR22 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Konig Electronic HAV-PR22 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Zweeds, Fins als bijlage per email.

De handleiding is 1,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info