4
Chapter 4: Quick Setup Guide
4.1 Setup Wizard
Here is the “Welcome to Setup Wizard” for quick configuration of your Router. Click “Next”.
In this screen, select one mode of Internet connection that you use. If you are not sure, press the “Detect”
button or contact your Internet Service Provider, and click “Next”.
ADSL Virtual Dial-up (Via PPPoE)
Enter the Account and Password provided by your ISP, and click “Next”.
Dynamic IP (Via DHCP)
If your connection mode is Dynamic IP, it means your IP address keeps changing every time you connect. You
do not need to enter the information like other modes. Click “Next” and “Save” to finish the settings.
Static IP
In this screen, enter the network address information from your ISP in the IP Address, Subnet Mask, Gateway
and Primary DNS server fields and click “Next”.
L2TP
Consult your ISP for the required information.
Chapter 5: Advanced Settings
5.1 LAN Settings
LAN Settings are for the basic TCP/IP parameters of LAN ports.
IP Address: The Router’s LAN IP addresses (not your PC’s IP address). 192.168.0.1 is the default value.
Subnet Mask: It shows the Router’s subnet mask for measuring the network size. 255.255.255.0 is the
default value.
IMPORTANT:
Once you modify the IP address, you need to remember it for the Web-based Utility login next time.
5.2 WAN Settings
After you have selected the ISP connection type in “Setup Wizard” and you want to modify the related settings,
you can modify and configure the settings in detail here .
Static IP
If static IP is chosen as connection mode, you can modify the following address information.
IP Address: Enter the WAN IP address provided by your ISP here.
Subnet Mask: Enter the WAN Subnet Mask here.
Gateway: Enter the WAN Gateway here.
Primary DNS Server: Enter the Primary DNS server provided by your ISP.
Secondary DNS Server: Enter the secondary DNS.
Chapter 6: Wireless Setting
6.1 Basic Settings
Enable Wireless: Check to enable the Router’s wireless features; uncheck to disable it.
Network Mode: Select one mode from the following. The default is 11b/g/n mode.
Main SSID: SSID (Service Set Identifier) is the unique name of the wireless network. This device has two
SSIDs and the main SSID is necessary.
Minor SSID: This is optional.
Broadcast (SSID): Select “Enable” to enable the device's SSID to be visible to wireless clients. The
default is enabled.
