717861
561
Verklein
Vergroot
Pagina terug
1/578
Pagina verder
magicolor 8650 18-5
Appendix
18
18.3 If the bit count of the operating system differs between the server and
the client
If Windows Server 2008/Server 2008 R2 is running on the print server and the bit count of the operating
system differs between the print server and the client computer, an additional driver may not be able to be
correctly installed to the print server.
To solve such a problem, specify a setup information file (ntprint.inf) for the operating system having a
different bit count when installing an additional driver to the print server.
This section describes how to install an additional driver by specifying a setup information file in a computer
separate from the print server.
2
Note
Prepare a different client computer than the print server for configuration and install an operating
system with a different bit count from the print server.
On the print server, assign the system drive of the client computer as the network drive. It is necessary
to configure the print server to share the drive to be assigned before installing an additional driver.
18.3.1 Installing an additional driver
The following example shows how to install an additional driver with the print server running 32-bit Windows
Server 2008 and the client computer running 64-bit Windows Vista.
1 Configure the print server to share a drive in which the operating system for the client computer is
installed (normally drive C).
2 On the print server, assign the drive (for example, "C") of the client computer you configure for sharing
in Step 1 as the network drive (for example, "z").
3 Install the printer driver for a 32-bit OS on the print server.
4 Open the "Properties" dialog box of the printer you have created.
5 Click the "Sharing" tab and then select "Share this printer".
6 Click [Additional Drivers].
The Additional Drivers dialog box appears.
7 Select "x64" in the "Processor" column, and then click [OK].
8 Specify the folder containing the printer driver for a 64-bit OS.
A dialog box appears, prompting for a setup information file.
9 Click [Browse] to specify the setup information file (ntprint.inf) in the client computer you assigned the
network drive.
Specify the file shown below:
"z:\Windows\System32\DriverStore\FileRepository\ntprint.inf_xxx"
Where "z" is the network drive you assigned. "_xxx" differs depending on the version of the driver.
The location of the setup information file may differ on your client computer. If a folder named
"amd64" exists at the same level in the hierarchy as "ntprint.inf", specify the setup information file
for 64-bit OS directly under it. To install an additional driver for a 32-bit OS, specify a setup
information file that has a folder named "i386" at the same level in the hierarchy as "ntprint.inf".
10 Click [Open].
Installation starts.
11 When the installation completes, click [Close].
This completes the installation process for the additional printer driver for 64-bit OS.
561

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Konica Minolta Magicolor 8650 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Konica Minolta Magicolor 8650 in de taal/talen: Engels als bijlage per email.

De handleiding is 12,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Konica Minolta Magicolor 8650

Konica Minolta Magicolor 8650 Gebruiksaanwijzing - Nederlands - 590 pagina's

Konica Minolta Magicolor 8650 Gebruiksaanwijzing - Deutsch - 590 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info