782842
38
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
38
English
Error codes
Code Meaning Possible causes Solution
E30 Door lock problem Door is not closed properly Restart after the door is closed
again.
E10 Water injection
problem while
washing
Tap is closed or water flows
too slow.
Inlet valve filter is blocked.
Inlet hose is twisted
Open the tap or wait till the
water supply becomes normal
Check the inlet valve
Straighten the hose
E21 Drain problem
during washing
Outlet hose is blocked or
twisted
Drain pump is blocked
Clean and straighten the
outlet hose.
Clean drain pump filter
E12 Water overflow Water remains in the appliance Restart the appliance
EXX Others - Restart the appliance. If the
problem persists, please
contact the customer service
Troubleshooting
If there are any problems during operation, please refer to the following table. If the problems
cannot be solved as indicated under Solution or if spare parts for self-repair are necessary, please
contact the service center. The respective hotlines are noted in the warranty card, provided with
this product. Please note, that improper self-repair can lead to hazards as well as voidance of the
warranty and should be refrained from, if in doubt.
Problem Possible causes Solution
Product does not work and/or
indicator/display does not light
Interrupted power supply Check the power supply
Door cannot be opened Machine’s protection mechanism
is active
Disconnect from the
power
Heating fault NTC (temperature sensor) is
damaged or heating pipe is aging
Contact the service
center
Water leakage Connection between inlet pipe or
outlet hose and tap or washer-
dryer is not tight.
Drain pipe is blocked
Check and fasten the
water pipes
Clean up outlet hose
Water is overflowing from the
bottom of the machine
The inlet pipe is not connected
firmly.
Outlet hose has water leakage
Fix the inlet pipe
Replace the drain hose
Washing result is not satisfying The clothes are too dirty
Insucient detergent quantity
Select a proper program
Add proper detergent
quantity
Abnormal noise / Strong
vibrations
Check if transport restraints have been removed
Machine is installed on solid floor
Check if any metal parts (e.g. from embroideries) are inside the drum
Adjust the feet of the machine
IM_KWDR 8632 B INV_211029_V08_HR.indb 38IM_KWDR 8632 B INV_211029_V08_HR.indb 38 29/10/2021 10:10 AM29/10/2021 10:10 AM
38

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Koenic KWDR 8632 B INV bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Koenic KWDR 8632 B INV in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 3.7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info