539405
4
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
4
DATA SETTING PROCESS (Fig 1.1)
1. All user-input data is adjusted for each digit separately.
The current digit to be set will flash.
2. Press
A
to increase the digit value by 1.
3. Hold down
A
for 2 seconds to advance to the next
digit.
4. Press
B
to store the on-screen data and advance to the
next data setting.
5. Once all data setting is complete, hold down
B
for 2
seconds to exit the data setting mode. This can also be
done at any point whilst in data setting mode, leaving
the remaining un-set data with a
reading.
INITIATING THE COMPUTER (ALL CLEAR) (Fig 1.2)
1. A battery is already loaded in the main unit when
purchased. Hold down
A
and
B
simultaneously for 3
seconds to initiate the computer and clear all data.
It is important to initiate the computer before first
usage to prevent the computer producing errors.
2. The LCD segments will be tested automatically after the
unit is initiated.
3. Press
A
to stop LCD test. You will then see a flashing
KM/H.
UNIT SELECTION (Fig 1.3)
Press
A
to toggle between KM/H or M/H (Mile/hour). Press
B
to confirm the current selection.
CIRCUMFERENCE DATA SETTING (Fig 1.4a)
1. The display shows
for the Bike
1
default
circumference value of 2155mm. Measure the value for
your wheel by following the steps below. (The Bike
2
default circumference value is 2050mm.)*
MEASURING WHEEL CIRCUMFERENCE (Fig 1.4b)
Roll the wheel until the valve stem is at its lowest point
(closest to the ground) then mark this first point on
the ground. Roll the bicycle forward until the wheel has
completed one full revolution and the valve stem returns
to its lowest point. Mark the second point on the ground.
Measure the distance between the marks. Enter this value
to set the wheel circumference. It is important that this
measurement is accurate to ensure correct data input
when riding.
ODOMETER AND TOTAL TRIP TIME DATA SETTING (Fig
1.5)
1. Designed for entering in previous data of ODO
1
,
ODO
2
*, T.TIMED TRIP
1
and T.TIMED TRIP
2
* after a
battery replacement. A new user does not need to set
this data. Each press of
B
advances to the next data
setting screen.
2. Adjust the digits as described in the Data Setting
Process. (Fig 1.1)
MAIN UNIT SETUP
Fig 1.1
DATA SETTING PROCESS
2 seconds 2 seconds
* = N.E.R.D Wireless 12 Function Cycle Computer only
4

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Knog-Nerd-9

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Knog Nerd 9 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Knog Nerd 9 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Knog Nerd 9

Knog Nerd 9 Gebruiksaanwijzing - Français - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info