588352
11
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
Troubleshooting
If one or both SP-1 subwoofers have little or no output:
— Double check your power (AC) and system connections.
— Make sure that the power switch on the rear control panels of both units is set to the
“ON” or “AUTO” position.
— Check that the power light on the front of the SP-1 is lit. If not, check the AC fuse. When
changing the AC main’s power fuse, unplug the power cord first. To access the fuse, use the
appropriate screwdriver to unscrew the cap on the fuse receptacle. If the fuse is blown (the
lament inside the glass tube is burned through), replace it with the same type and value as
is printed on the amplifier panel next to the fuse holder. NEVER INSTALL A LARGER
FUSE THAN THE VALUE INDICATED ON THE AMPLIFIER PANEL. If the fuse blows
again when the subwoofer is powered up, return the unit to your authorized Klipsch dealer
for servicing by qualified personnel. If dealer service is not available, contact Klipsch
customer service for a Return Authorization number before shipping (REQUIRED).
Klipsch Customer Service: 800-554-7724
All return shipments should be made to:
Klipsch, L.L.C.
137 County Road #278
Hope, AR 71801
RA#…(return authorization number required)
The SP-1’s powered subwoofer amplifier is protected by a thermal sensor. If the unit is run for
extended periods beyond its designated power rating, the thermal sensor will engage and shut
down the subwoofer. If this occurs, turn the “POWER” switch off, turn down the volume on
your electronics and wait five minutes before restarting the system.
If you experience a noticeable hum when the SP-1’s subwoofer is connected to your system
(a system that includes video equipment), disconnect the cable television line (if present). If the
hum disappears, consult your Klipsch dealer for a ground isolator for the cable line. If this does
not solve the problem, contact your Klipsch dealer for further advise.
Regardless of your amplifiers rated capacity, do not operate the system at the full output (highest
volume): Amplifiers can create extremely high levels of distortion when operated at full output
and can damage your loudspeakers. Most amplifiers are at full power when the volume control is
at or just above the 12 o’clock position.
Position speaker connection wires so that they do not create a trip hazard.
If you have any questions regarding the installation or connection of your Klipsch Synergy speakers,
please contact your Klipsch dealer or contact us directly at 800-554-7724.
Care and Cleaning of Your Klipsch
Synergy Speakers
Your speakers have a durable matte vinyl finish that should only require dry dusting or cleaning
with a damp cloth. Avoid the use of abrasive or solvent-based cleaners and harsh detergents.
!
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Klipsch SB-3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Klipsch SB-3 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info