584806
9
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
Page 16 Page 17
Loudspeaker Components -3Loudspeaker Components -2
Treble Compression Driver
Low distortion, high sensitivity, wide bandwidth and neutral tonality have been,
in this ground-breaking design, pushed beyond the standards for any previous
Klipsch driver.
Built around a .75-inch titanium dome, the tweeter makes use of two very large
high temperature N35H neodymium magnets in an unconventional congura-
tion. The titanium dome and surround are formed as one common unit.
The chamber behind the tweeter dome is resistively damped via a lled tube
to reduce reection of the back wave—and thereby the distortion that would otherwise be produced. The phase
plug that puts the dome into a compression mode also has a unique chamber within it that extends the upper
frequency limit of the driver. This proprietary technique oers numerous benets, including the elimination of
undesirable standing waves in the high pressure layer between the phase plug and horn. The result is a smooth
impedance transfer function, and a benign load on the partnering amplier. Additionally, this technique produces
smoother amplitude response through the high frequency
range. With its unique horn and phase plug, the P-39F tweeter
demands far less drive current from the amplier, so the driver
can maintain full dynamic capability at any volume level.
This driver is inherently at from 3 KHz to 30 KHz. and has an
inherent sensitivity some 10 dB greater than direct radiating
designs. Distortion is also reduced by a factor of 10 dB, against
conventional tweeters.
Crossover Network
The network is a two board construction located adjacent to the speakers base
plate, which conveniently positions the tri-wire input connectors at oor level.
This minimizes the length of speaker wire and produces a clean nished look.
Through very accurate driver engineering, the system oers excellent perfor-
mance without the need for corrections in the crossover network. A crossover
should provide a smooth transition from driver to driver, allowing each element
to operate at its optimum performance within its designed frequency range. This
accomplished, the network can be a straightforward design and use extremely
high quality parts without imposing unnecessary budget constraints. A simple,
elegant crossover also means the speak-
er will have a more direct and coherent
character as compared with products that must employ complex
networks to iron out their shortcomings. Polyester capacitors along
with all air-core inductors, ensure best performance and longevity.
The network produces a fourth-order electro-acoustic lter when
combined with the smooth, natural roll o of the drivers.
Cabinet
Functionally, any loudspeaker enclosure provides a mechanical placement
of each transducer, a method for suppressing acoustical radiations and a reso-
nant chamber to extend low frequency performance. The P-39F is an artistic
blend of beauty and functional performance. Its industrial design was guided
by the global consultancy of BMW Group DesignworksUSA.
Enclosure resonances can be suppressed through the geometry of the en-
closure and mass of the panels. The P-39F enclosure contains nonparallel wall
structures and thick, high mass walls. Nonparallel wall structures signicantly
decrease standing waves. Cabinet wall thick-
nesses are a minimum of 1-inch thick with an
even thicker front bae. Custom inner and
outer laminated panels sandwich a middle layer of dissimilar material designed with
a dierent mechanical impedance to ensure the cabinet does not color the sound.
To further increase enclosure stiness, four “H braces are strategically positioned
in the enclosure to reinforce the structure, control resonance and minimize modal
standing waves. The massive front bae design allows all woofers and the mid/
high horn structure to mount ush to the exterior edge. The width of the front
bae has also been minimized to decrease the total area. A smaller front bae
directly correlates to improved o-axis performance. The overall enclosure was de-
signed to extend the low frequency response of the three woofers to 39Hz (-3dB).
This fourth-order, vented enclosure contains three custom ared, tuned ports
cleverly blended into the rear of the curved enclosure. Just below the ports, a high
mass aluminum and steel base is integrated into the bottom of the enclosure. The
base contains four adjustableoor anchors, which decouple the cabinet from the
oor by supporting the cabinet at just four points.
Tractrix® Horn Design
Horn-loaded technology is the driving force behind the remark-
ably accurate Klipsch sound. Horns oer high eciency, low dis-
tortion, controlled directivity and at frequency response, allowing
them to more closely reproduce the quality and tonal charac-
teristics of live sound. In the P-39F, the high and mid-frequency
drivers both use the latest evolution of our Tractrix® Horn design,
featuring a 90° x 60° coverage pattern and a lofted throat design
for exemplary on-axis response. These horns have been molded as
a single unit, using a proprietary, acoustically inert, carbon-infused
thermoset composite material. The high- and mid-frequency
drivers are connected to the horns via chamber-dampened phase
plugs that result in a 4:1 compression ratio, delivering remarkable
eciency with astonishingly low distortion. This arrangement
allows the P-39F to provide a unique combination of precision,
clarity and eortless power.
Bass Network
Mid and Treble Network
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Klipsch P-39F bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Klipsch P-39F in de taal/talen: Engels als bijlage per email.

De handleiding is 1,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Klipsch P-39F

Klipsch P-39F Gebruiksaanwijzing - Espanõl - 100 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info