584727
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Red and
Green
(alternating)
Quick Setup Guide - Programming The KLIPSCH ICON SB 1 To Your TV Remote
Easy, Three-Step Remote Programming
The KLIPSCH ICON SB 1 soundbar has four control buttons under the status indicator lights
on its front panel. From the top button down, they are SOURCE, MUTE, VOLUME UP, and VOLUME
DOWN. MUTE, VOLUME UP, AND VOLUME DOWN can easily be programmed to your TV, Satellite or
Cable box remote control so that you can use that remote to control these functions.
NOTE: The KLIPSCH ICON SB 1 model comes with its own remote and controls not only the
four control buttons but has a separate button for the 3D Surround Mode On/Off feature. MUTE,
VOLUME UP, AND VOLUME DOWN can be programmed into other remote controls using the built-
in Learning Remote feature, but the 3D Surround mode On/Off button cannot be learned by any
other remote and must be controlled with the included remote.
IMPORTANT NOTE: There is not a power on/off button on the front of the soundbar (there is a Main Power switch on the soundbar’s rear
panel). You do not need to turn off the soundbar (or subwoofer) when finished watching TV. When finished, turn off your TV (or Satellite or
Cable box if the soundbar is connected to that). The soundbar (and the subwoofer) will automatically go into a Standby or “sleep” mode
if they do not receive an audio signal from your TV, Satellite or Cable Box for approximately 10 minutes. Standby mode is indicated by a
solid red status light on the soundbar front and on the subwoofer rear panel. When your TV, Satellite or Cable box is turned back on and a
signal is again received, the soundbar (and subwoofer) will automatically come out of Standby mode and turn on.
STEP ONE (Place the unit in learning mode): With the status light showing solid GREEN,
press and hold the <SOURCE> and <MUTE> buttons on the front of the soundbar at the
same time (approximately 3 seconds) until the status light flashes RED and GREEN.
The following 3 steps should be used to program each function of your TV or cable box
remote control buttons (MUTE, VOLUME UP, and VOLUME DOWN). IF THE SOUNDBAR IS
IN STANDBY MODE (solid RED status light), push the <SOURCE> button on the sound-
bar until the status light is solid GREEN.
STEP TWO (Select the function to learn): Press the <MUTE> button once on the soundbar
(the status light changes to solid ORANGE). (Substitute the VOLUME UP, and VOLUME DOWN
in place of <MUTE> when programming the other buttons during this step)
STEP THREE (Learn the function): Hold your remote control within one foot and pointed
at the front of the soundbar. Slowly press the <MUTE> button on your remote control
four times. On the first three presses, the status indicator light will flicker ORANGE with
each press. If the unit has successfully learned the function, on the fourth press of the
button, the light will flash GREEN several times and then turn to solid GREEN. (Remem-
ber to use the VOLUME UP, and VOLUME DOWN in place of <MUTE> when program-
ming the other buttons during this step)
To program the remaining functions, simply repeat all steps, substituting <MUTE>
with the new function and button presses (VOLUME UP, and VOLUME DOWN) on steps
TWO and THREE.
STATUS LIGHTS
SOURCE
MUTE
VOLUME UP
VOLUME DOWN
Solid
Orange
3
x4
1 Foot
1 2
© 2012 Klipsch Group, Inc.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Klipsch Icon SB 1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Klipsch Icon SB 1 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Klipsch Icon SB 1

Klipsch Icon SB 1 Gebruiksaanwijzing - Deutsch, English, Français, Português, Espanõl - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info