640448
14
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
26 27
[...continued] Using the camera
9. Standby mode
Turn the power switch to the “ON” position. The system will start working and it will enter preview mode
once initialization has finished. If there is no operation for the set time in the system settings, the system will
automatically enter standby power-saving mode. Pressing the “Record” or “Shutter” key, or any key on the remote
control, will wake the system up
Note: Pressing keys on the TFT screen in standby mode cannot wake the system up
Note: The LCD segment screen will not display anything in standby mode
10. AV output connection
In preview state, connect the camera with the display device using an AV cable. All of the camera’s functions can
then be operated
Note: After connecting with an audio and video display device, the TFT screen on the camera and the voice will
be turned off, and the audio and video will be displayed on the device’s display. The LCD segment screen on the
camera will display the corresponding function operations normally
11. HDMI output connection
In preview state, connect the camera with the high-definition display device using an HDMI cable. The camera’s
functions can then be operated
Note: After connecting with the HDMI display device, the TFT screen on the camera and the voice will be turned
off and the audio and video will be displayed on the device’s display
Note: The camera may be in an abnormal state if the HDMI cable is inserted or unplugged improperly when
connecting. It can be recovered once it is re-started and the LCD segment screen will display the corresponding
function operations normally
12. USB connection
In startup state, use the USB cable to connect to a computer. Data stored on the micro SD card can be read and
the LCD segment screen will display the USB connection state icon
• The camera can be charged at any time by connecting to a computer with the USB cable
The camera may be in abnormal state if the USB cable is inserted or unplugged improperly when connecting.
Restarting will recover the camera
13. Turning the TFT display on/off
When the camera is in any status, pressing the “Shutter” key for 3 seconds will turn the TFT display on or off.
Note: The TFT display cannot be turned on or off by pressing the “Shutter” key on the remote control
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kitvision Edge HD10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kitvision Edge HD10 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Kitvision Edge HD10

Kitvision Edge HD10 Gebruiksaanwijzing - Nederlands - 18 pagina's

Kitvision Edge HD10 Gebruiksaanwijzing - Deutsch - 18 pagina's

Kitvision Edge HD10 Gebruiksaanwijzing - Français - 18 pagina's

Kitvision Edge HD10 Gebruiksaanwijzing - Espanõl - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info