821861
6
Verklein
Vergroot
Pagina terug
1/164
Pagina verder
6
GETTING STARTED (CONTINUED)
5. To rinse the Group Head, place a container under the Group Head. Toggle the Mode
Button to select Espresso. Toggle Dose Button to 1 and press Button. The machine
will flush water through the Group Head and automatically stop when the cycle is
complete.
6. To rinse the Steam Wand, direct the Steam Wand towards the Drip Tray or into a cup.
Then, toggle the Mode Button to select Hot Water and press Button to start. Allow
water to flow for 3 to 5 seconds then, press Button to stop.
PRODUCT USAGE
BREWING ESPRESSO
1. Select desired Filter basket. Press the Filter basket into the Portafilter until it clicks into
place.
2. Fill the Filter basket with fine Espresso coffee grounds.
3. Tap the Portafilter to level the ground coffee bed and rest on a flat surface. Use the Tamper
to tamp down the ground coffee. Sweep excess coffee grinds from the rim.
4. Position the Portafilter under the Group Head with the handle align to unlock. Raise the
Portafilter into the Group Head and twist to the right side to lock.
5. Toggle Mode Button to select Espresso. Toggle Dose Button to select desired number of
shots 1 (~ 30 ml) or 2 (~ 60 ml).
6. Press Button to run selected Espresso cycle.
NOTE: Do not remove the Portafilter when brewing.
TIP: Shot duration should be between 20-30 seconds for 1 and 2 shot selections.
- If less than 20 seconds: decrease grind size and/or increase tamp pressure.
- If more than 30 seconds: increase grind size and/or reduce tamp pressure.
PROGRAMMING FUNCTION
The Espresso Machine is equipped with programming functionality. Any customised
settings will be saved even in the event power is lost to the machine.
PROGRAMMING THE ESPRESSO AND HOT WATER AMOUNT
1. To change pre-programmed Espresso Volume for 1 / 2: Toggle the Mode Button to
select Espresso. Select the dose you desire to programme (1 or 2). Press and hold
Button until desired espresso amount is reached in your cup. While programming your
selected dose, the dose and the Button lights will blink. Lights will stop blinking when
programming is complete.
2. To change pre-programmed Water Volume for 1 / 2: Toggle the Mode Button to select
Water. Select the dose you desire to programme (1 or 2). Press and hold Button until
desired water amount is reached in your cup. While programming your selected dose, the
dose and the Button light will blink. Lights will stop blinking when programming is
complete.
NOTE: To restore all factory settings, Press and Hold “Dose Button” for 3 seconds.
Changing the factory default Espresso or Water Volumes may impact the intended
performance of the machine.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw KitchenAid 5KES6403 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van KitchenAid 5KES6403 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 1,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info