606703
9
Verklein
Vergroot
Pagina terug
1/75
Pagina verder
REPEATER – 3
TRANSMITTING A 1750 Hz TONE
Most repeaters in Europe require that a transceiver
transmit a 1750 Hz tone. On a TH-D72E, simply pressing
[CALL] will transmit this tone. It is also possible to
program [1750] on the front panel as a [CALL] key for
transmitting the 1750 Hz tone.
1 Enter Menu mode and access Menu 162.
2 Set it to “1750Hz”.
Some repeaters in Europe must receive continuous
signals for a certain period of time, following a 1750 Hz
tone. This transceiver is also capable of remaining in the
transmit mode for 2 seconds after transmitting a 1750 Hz
tone.
1 Enter Menu mode and access Menu 163.
2 Set it to “On”.
Note: While remaining in the transmit mode, the transceiver does not
continuously transmit a 1750 Hz tone.
REVERSE FUNCTION
After setting a separate receive and transmit frequency,
you can exchange these frequencies using the Reverse
function. This allows you to manually check the strength
of signals you receive directly from other stations, while
using a repeater. If the station’s signal is strong, move to
a simplex frequency to continue the contact and free up
the repeater.
Press [REV] to turn the Reverse function On or Off
When the Reverse function is On, the “ ” icon will appear on
the display.
Note:
If the transmit frequency is outside the allowable transmit
frequency range when using Reverse, pressing [PTT] will cause
an error tone to sound and transmission will be inhibited.
If the receive frequency is outside the receive frequency range
when using Reverse, an error tone will sound and Reverse will
not operate.
The ARO (Automatic Repeater Offset) will not function when
Reverse is ON.
You cannot switch Reverse On or Off while transmitting.
AUTOMATIC SIMPLEX CHECKER (ASC)
While using a repeater, ASC periodically monitors the
strength of signals you receive directly from the other
stations. If the station’s signal is strong enough to allow
direct contact without a repeater, the “
” icon blinks.
Press [REV] (1s) to turn the ASC On.
When the ASC is On, the “ ” icon will appear on the display.
While direct contact is possible, without the use of a repeater,
the “
” icon will begin blinking.
To exit ASC, press [REV].
Note:
Pressing [PTT] will cause the “
” icon to stop blinking.
ASC does not function if you are using simplex operation.
ASC does not function while scanning.
Activating ASC while using Reverse will switch the Reverse
function Off.
If you recall a Memory channel or the Call channel, and those
channels are set up with the Reverse function switched On, the
ASC will switch Off
You cannot use ASC when the built-in TNC is turned On.
ASC causes received signals to be momentarily intermitted every
3 seconds.
TONE FREQUENCY ID
This function scans through all tone frequencies to identify
the incoming tone frequency on a received signal. You
can use this function to find which tone frequency is
required by your local repeater.
1 Press [TONE] to switch the Tone function On.
• The ” icon appears on the display.
2 Press [F], [TONE] (1s) to run the Tone Frequency ID
scan.
Scan starts and Scanning blinks on the display.
To reverse the scan direction, turn the Tuning
control clockwise <or press [
]> (upward scan) or
counterclockwise <or press [
]> (downward scan).
To quit the function, press [ESC
].
When the tone frequency is identified, the identified
frequency appears on the display and blinks. Press any
key other than [
OK] while the identified frequency is
blinking, to resume scanning.
3 Press [ OK] to program the identified frequency in
place of the currently set tone frequency.
The Tone function will remain On. You can press [TONE]
to switch the Tone function Off.
• Press [ESC
] if you do not want to program the
identified frequency.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TH-D72A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TH-D72A in de taal/talen: Engels als bijlage per email.

De handleiding is 7,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Kenwood TH-D72A

Kenwood TH-D72A Gebruiksaanwijzing - Nederlands - 156 pagina's

Kenwood TH-D72A Gebruiksaanwijzing - Nederlands - 73 pagina's

Kenwood TH-D72A Gebruiksaanwijzing - Deutsch - 156 pagina's

Kenwood TH-D72A Gebruiksaanwijzing - Deutsch - 75 pagina's

Kenwood TH-D72A Gebruiksaanwijzing - English, Français - 156 pagina's

Kenwood TH-D72A Gebruiksaanwijzing - Français - 76 pagina's

Kenwood TH-D72A Gebruiksaanwijzing - Italiano - 156 pagina's

Kenwood TH-D72A Gebruiksaanwijzing - Espanõl - 156 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info