465279
54
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
54
RV-7000/RV-6000/RA-5000
Troubleshooting
Troubleshooting
Amplifier
Symptom Cause Remedy
No sound from the speakers. The speaker cords are disconnected. Connect it properly referring to <Connecting speakers>.
^(
VOLUME is set to the minimum position. Adjust the volume to a proper level.
MUTE is ON.
Turn OFF the MUTE. W
The SPEAKERS switches are set to OFF.
Set the SPEAKERS switch to ON.
The input source selection is incorrect. Select the input source you want to play.
The input mode is not set properly. Select the optimum input mode by referring to
<Selecting the input mode>.
Audio signal may not be output depending on the
connecting method and connected components.
Refer to the instruction manuals that come with the
connected components.
The standby indicator blinks and sound is not output. Speaker cords are short-circuited. Turn the power off, eliminate the short-circuiting, then
turn on the power again.
If the standby indicator still blinks after eliminating the
short-circuiting, there may be an internal defect. Switch it
off, unplug the power cord and call for service.
Sound is not output from one of the speakers. The speaker cord is disconnected. Connect it properly referring to <Connecting speakers>.
^(
The speaker is not set up correctly. Set it up properly referring to <Speaker setup>.
After setting, confirm that the test tone is output.
•ªº
Some speakers do not output audio depending on the
listen mode.
Sound is not output from the surround
speakers and/or the center speaker, or their sound is
very soft.
The surround speaker cords and/or the center speaker
cord is disconnected.
Connect it properly referring to <Connecting speakers>.
^(
The audio cannot be played in the desired signal format
(Dolby Digital or DTS).
Digital connection is necessary to play the Dolby Digital,
or DTS input signal in the input signal format.
Confirm that the input signal is connected to the
digital input or HDMI input terminal by referring to
<Connections>. $
The player component is not set for digital output. Confirm the audio output setup of the player component
by referring to its instruction manual.
When playing a Dolby Digital or DTS source, the sound is
cut off soon after it starts.
There are many possible causes for this problem,
depending on the player used.
Set the input mode to "MANUAL" before starting playback
of the Dolby Digital or DTS source.
No sound is produced during playback from a BD/DVD
player.
The input mode is set to "MANUAL".
Press the [INPUT MODE] key to select to "AUTO".
A video source cannot be recorded normally. The software is copy-guarded. Copy-guarded video software cannot be recorded.
The audio of a digital broadcast cannot be switched. The audio of certain broadcasts cannot be switched with
this unit.
Switch the audio on the digital tuner.
Display is turned off. PURE AUDIO MODE is on. While the PURE AUDIO MODE is on, the display is turned
off. Turn off the PURE AUDIO MODE. °
This unit is turned OFF spontaneously. APS is ON.
Turn OFF the APS. ¤
Audio is not output when the TV input is selected. The TV is ARC-incompatible. Connect to the HDMI terminal of an ARC-compatible TV.
The HDMI terminal is ARC-incompatible. Connect to the ARC-compatible HDMI terminal.
The HDMI Link is OFF.
Set the HDMI Link to ON.
54

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Kenwood-RV-6000

Zoeken resetten

  • Ik heb de Kenwood RV-6000 gekocht maar ik heb een probleem met mijn sub woofer. Als ik de speakertest doe geeft de sub woofer een signaal maar als ik muziek afspeel doet de sub woofer het niet.
    Kunt u mij helpen, want ik weet het niet meer.

    En ik vind het jammer van zo’n mooie receiver.

    Graag uw hulp dus.

    Groet,
    Willem van de Haar

    Gesteld op 29-11-2012 om 21:43

    Reageer op deze vraag Misbruik melden
    • ik ben er ook zo mee aan t stoeien geweest .
      Ik heb bij easy setup (op toestel zelf) de grote van kamer veranderd, en nu doet subwoofer t weer .(ik vermoed dat dat de reden was, maar ik heb zoveel instellingen veranderd , dat ik niet zeker weet ) Geantwoord op 9-11-2013 om 13:04

      Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood RV-6000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood RV-6000 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Kenwood RV-6000

Kenwood RV-6000 Gebruiksaanwijzing - Nederlands - 60 pagina's

Kenwood RV-6000 Gebruiksaanwijzing - Deutsch - 60 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info