683035
48
Verklein
Vergroot
Pagina terug
1/49
Pagina verder
Wichtiger Hinweis zur Software
MD5 utility
/* crypto/md5/md5.h */
Copyright (C) 1995-1998 Eric Young
(eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written
by Eric Young (eay@cryptsoft.com).
The implementation was written so as to conform
with Netscape's SSL.
This library is free for commercial and non-com-
mercial use as long as the following conditions are
adhered to. The following conditions apply to all
code found in this distribution, be it the RC4, RSA,
lhash, DES, etc., code; not just the SSL code. The SSL
documentation included with this distribution is
covered by the same copyright terms except that
the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young's, and as such
any Copyright notices in the code are not to be
removed.
If this package is used in a product, Eric Young
should be given attribution as the author of the
parts of the library used.
This can be in the form of a textual message at
program startup or in documentation (online or
textual) provided with the package.
Redistribution and use in source and binary forms,
with or without modification, are permitted provid-
ed that the following conditions are met:
1. Redistributions of source code must retain the
copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce
the above copyright notice, this list of conditions
and the following disclaimer in the documen-
tation and/or other materials provided with the
distribution.
3. All advertising materials mentioning features or
use of this software must display the following
acknowledgement:
This product includes cryptographic software
written by Eric Young (eay@cryptsoft.com)”
The word cryptographic’ can be left out if the
routines from the library being used are not
cryptographic related :-).
4. If you include any Windows specific code (or
a derivative thereof) from the apps directo-
ry (application code) you must include an
acknowledgement:
This product includes software written by Tim
Hudson (tjh@cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS
IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WAR-
RANTIES OF MERCHANTABILITY AND FITNESS FOR
A P
ARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPE-
CIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCL
UDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIA-
BILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
The license and distribution terms for any publicly
available version or derivative of this code cannot
be changed. i.e. this code cannot simply be copied
and put under another distribution license [includ-
ing the GNU Public License].
---------------------------------------------------------------------
CRC utility
COPYRIGHT (C) 1986 Gary S. Brown. You may use
this program, or code or tables extracted from it, as
desired without restriction.
First, the polynomial itself and its table of feedback
terms. The polynomial is X^32+X^26+X^23+
X^22+X^16+X^12+X^11+X^10+X^8+X^7+
X^5+X^4+X^2+X^1+X^0
Note that we take it “backwards” and put the
highest-order term in the lowest-order bit. The
X^32 term is “implied”; the LSB is the X^31 term,
etc. The X^0 term (usually shown as “+1”) results in
the MSB being 1.
Note that the usual hardware shift register imple-
mentation, which is what we're using (we're merely
optimizing it b
y doing eight-bit chunks at a time)
shifts bits into the lowest-order term. In our imple
-
mentation, that means shifting towards the right.
Wh
y do we do it this way? Because the calculated
CRC must be transmitted in order from highest-order
term to lowest-order term. UARTs transmit characters
in order from LSB to MSB. By storing the CRC this way
we hand it to the UART in the order low-byte to high-
byte; the UART sends each low-bit to high-bit; and
the result is transmission bit by bit from highest- to
Wichtiger Hinweis zur Software
48
48

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood DRV-830 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood DRV-830 in de taal/talen: Duits als bijlage per email.

De handleiding is 9,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Kenwood DRV-830

Kenwood DRV-830 Gebruiksaanwijzing - Nederlands - 52 pagina's

Kenwood DRV-830 Gebruiksaanwijzing - English - 25 pagina's

Kenwood DRV-830 Gebruiksaanwijzing - Français - 52 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info