Handleiding Kenwood DRV-330 (pagina 2 van 2) (Engels)

683036

Verklein

Vergroot

Pagina terug

1/2

Pagina verder

Guidelines for Recording Times (While the Battery is Full)

Standing by in parking mode: approx. 25 minutes

During continuous recording (time for always recording ): approx. 15 minutes

Guideline for Charging Time

When using the provided car charger: approx. 3 hours

* The battery is not fully charged directly after purchase. As a result, operations may become

unstable, and you may not be able to do parked recording. Start using the device after it is fully

charged.

GPS

• GPS positioning begins when the power of the device turns on. Positioning may take about 5

minutes to complete depending on the GPS positioning conditions.

• GPS satellite signals cannot pass through solid materials (except glass). GPS positioning cannot

be used in tunnels and buildings. Signal reception may be affected by conditions such as bad

weather and dense overhead obstacles (e.g., trees, tunnels, viaducts, and tall buildings). Speed,

position, and other information will not be displayed correctly when GPS satellite signals cannot

be received.

• GPS positioning data is reference values.

• GPS is managed by the U.S. government, which assumes full responsibility for its performance.

Changes to the GPS system may affect the accuracy of all GPS devices.

If You Notice a Problem with the Device

Reset the device. Turn off the power by pressing the reset button on the back of the device with

the tip of a thin paperclip. Press the power button once again to turn the device on again.

SD Cards

Cards supported by this device

Standard microSDHC

Capacity 4 GB to 32 GB

Speed class Class 6 or higher

File system FAT32

Up to the Class 10 speed class is supported.

Precautions for using SD cards

• When using a commercially available SD card, also check the instructions supplied with the SD

card.

• Be sure to format (initialize) an SD card with the device before use.

• SD cards have a product lifespan, such as the number of times that writing can be performed.

It is recommended to replace the SD card with a new one regularly depending on the usage

conditions.

• When inserting and removing an SD card, confirm the orientation, do not bend it, and do not

apply a strong force or impact to it.

• Do not directly touch the contact part with a hand or metal. The stored data may be damaged or

lost due to static electricity.

• Be sure to back up (copy) the required files in the SD card to a PC or other device. The saved data

may be lost due to the usage conditions of the SD card. Please note that JVC KENWOOD cannot

compensate for any damages arising from the loss of saved files.

• Format the memory card periodically.

• Do not remove the memory card while recording or during playback because it may corrupt the

data on the memory card.

• The device may not operate normally if you use an SD card that was used by another device,

such as a computer or digital camera. Format the memory card in the device.

• Depending on the specifications of the memory card, the reading and writing speeds for the

device's data may differ.

==Konatu Description==

This is TrueTypeFont where BitmapFont is

embedded.

It was confirmed to use it with Windows XP, and

Ubuntu 12.10

===licence===

This work is licensed under The MIT License.

* http://opensource.org/licenses/mit-license.php

===Author===

BY:MASUDA mitiya

Mail:mitimasu@gmail.com

Please use Japanese or easy peacy English.

===================================

The MIT License (MIT) The MIT License (MIT)

Permission is hereby granted, free of charge, to

any person obtaining a copy of this software and

associated documentation files (the "Software"), to

deal in the Software without restriction, including

without limitation the rights to use, copy, modify,

merge, publish, distribute, sublicense, and/or sell

copies of the Software, and to permit persons to

whom the Software is furnished to do so, subject to

the following conditions:

The above copyright notice and this permission

notice shall be included in all copies or substantial

portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT

WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,

INCLUDING BUT NOT LIMITED TO THE WARRANTIES

OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE AND NONINFRINGEMENT. IN NO EVENT

SHALL THE AUTHORS OR COPYRIGHT HOLDERS

BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

LIABILITY, WHETHER IN AN ACTION OF CONTRACT,

TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN

CONNECTION WITH THE SOFTWARE OR THE USE OR

OTHER DEALINGS IN THE SOFTWARE.

http://opensource.org/licenses/mit-license.php

Displaying the Menu

Press the button to display the menu.

The menu appears.

• When you are in parked recording mode, press the power button to cancel it.

• Recording halts while the setup menu is on display.

Menu Screen Operations

Moves the menu up.

Sets an item.

Returns to a previous item.

Menu Item Function explanation

File Playback

Video*

Event

Parking

Photo

Select the folder and file to play back.

While playing the file back, you can move it and delete

it.

Sound Recording

On*

Off

Set whether or not to record sound at the same time as

recording video.

Parking

Mode

Detection

Off*

Set whether or not to use parking mode. A screen to

set the storage area and to format the memory card

appears when the parking mode is set to "On".

Save any files you need to a computer, etc., before you

change any settings.

For information about how to do these settings, see

Step 3 of "Setting up the Device" on the front of this

manual.

Detection

Method

Both*

Only G-sensor

Only Motion

Set the detection method that starts the parking

mode's video recording.

Only G-sensor: Monitors impacts with your vehicles.

Only Motion: Monitors movements within the range

of the lens.

Auto Entry

Easy

Medium*

Difficult

Manual

While the device’s power is on, if the unit has not felt

any vibrations from the vehicle for about 5 minutes,

it determines that the vehicle is parked, and activates

parked recording mode.

Set the sensitivity of the sensors that activate the parked

recording mode.

Easy: parked recording mode activates when there are

subtle vibrations

Difficult: parked recording mode activates when there

are harsh vibrations

Manual: manually activate the parking mode without

automatic activation

To activate the parking mode manually:

Press the

button.

Motion

Detection

Low

Medium*

High

Set the sensitivity at which the movements of people

and vehicles in the range of the lens are detected.Low

(hard to detect) ↕ High (easy to detect)

G-Sensor

Sensitivity

Low

Medium*

High

Set the sensitivity to detect impacts with your vehicle.

Low (hard to detect) ↕ High (easy to detect)

Video

Recording

Video Clip Length

1 min

3 min*

5 min

Set the recording time per file that is recorded

during continuous recording (always recording)

and event recording.

WDR

On*

Off

Set the function that reduces underexposure and

overexposure when there is a big difference in

the lighting of the scene.

-1 to 0* to 1

Set the brightness of the screen and the exposure

level (brightness) of the image being recorded.

G-Sensor

Sensitivity

Low

High

Set the detection sensitivity for impacts that are

stored to the event recording area, according

to the impact that occurred during normal

recording.

High: easy to detect

Low: hard to detect

Stamps

Coordinates*

G-sensor

Set the information to be recorded in the

recorded image. The information appears at

the bottom right of the recorded image and in

KENWOOD ROUTE WATCHER II.

Speed stamp

On*

Off

Set whether or not to show the speed you were

driving in the recorded files.

Text stamp ---

If you enter text (a maximum of 12 characters), it

appears at the bottom right of the recorded files

during playback.

/ : move the item , : enter the item

[←]: erase the last item , [OK] : confirm the text

System

Satellites ---

Shows the reception status of the GPS signal.

Date/Time

Use GPS time*

This automatically sets the date and time.

You must set the “Time Zone” and “Daylight

Saving Time”.

Manual

Manually set the date and time.

System Sound

On*

Off

Set whether or not to have warning sounds or

menu operation sounds.

Volume

Set the volume for playing back video files.

LCD Standby

Always On*

10 sec

1 min

3 min

Set the amount of time until the screen display

turns off when it is not in use.

Press any of the device's buttons to turn the

screen display back on.

Language Select the language used for the setting items. Default is "English".

Distance Unit

Metric

Imperial*

Set the units for distance and speed.

Storage

Allocation

1/3

2/3*

3/3

Set the storage areas for saving continuous

recordings, event recordings, parked recordings,

and still images.

Changing the settings formats and deletes all

data. Make a backup of the necessary files in your

memory card before doing this.

Restore to

Defaults

A message appears. Press the

button to return the menu's

settings to the factory default.

Press the button to format and erase all data. Make a backup of

the necessary files in your memory card before doing this.

Version Shows the version.

Format

Format the memory card.

Doing this formats and deletes all data. Make a backup of the necessary files in your

memory card before doing this.

* Settings at the time of purchase

Changing the Settings for the Screen Display Time during

Continuous Recording and Parking Monitoring

You can set the time until the display screen darkens (the screen turns off ) when it is not in use.

At the time of purchase, this is set to "Always On". The screen remains bright, even in parking mode.

You cannot set the brightness for each mode separately, such as during parking mode.

The screen darkens at the set time when it is not in use if this is set to anything other than "Always On".

• The screen turns off does not work when the event recording and play back the recording files.

Press the button to display the menu.

Press the / buttons to select "System", and press the

button.

▲ ▲▲▲ ▲

Press the buttons associated with the icons that appear.

Press the / buttons to select "LCD Standby", and press the

button.

Press the / buttons to select the time you want to set, and

then press the button.

Changing the Set Recording Time for Continuous

Recordings and Event Recordings

Press the button to display the menu.

Press the / buttons to select "Video Recording", and press the

button.

▲ ▲▲▲ ▲

Press the buttons associated with the icons that appear.

Press the / buttons to select "Video Clip Length", and press

the button.

Press the / buttons to select the time you want to set, and

then press the button.

Move the menu down.

Others

Various Settings Specifications

Precautions for Installation

• Install the device in a position where it will not block the front view of the driver

(position where hidden by the rear-view mirror).

• Install the device so that it is within the wiping range of the wiper.

• Install the device in a position where it will not interfere with the movement of the rear-view mirror.

• Take care not to install the device over the vehicle inspection sticker or other sticker.

• Take care not to install the device where it will interfere with driving or airbag operation.

• When installing the device in a vehicle equipped with a driving support system, check the

instruction manual of the vehicle and then select an installation location that will not interfere with

the driving support system.

• If the device is installed incorrectly, event recording or parking recording may not work correctly.

Refer to "How to Install" for the loosening of fixing knob, installation orientation, installation angle,

and other information and then install the device correctly.

• Do not install the device near a digital terrestrial television antenna or an electrical component.

Doing so may reduce television receiver sensitivity or cause flickering and noise.

• Use a commercially available cleaning cloth or the like to wipe off all dirt and grease on the

mounting surface and then fix the mount base in place. If the device is re-affixed or mounted using,

for example, general-purpose double-sided tape, the adhesion strength may weaken and cause the

device to fall.

• After mounting the device, leave it for 24 hours before use to enable the mounting strength of

the mount bracket to improve. Failing to do so may result in the adhesion of the mount bracket

becoming weak and the device falling.

• Fix the cord in place with tape or the like so that it does not interfere with driving.

Precautions for Use

• Do not block the camera lens, get dirt on it, or place a reflective object near it.

• When LED traffic lights are recorded, video in which they appear to be flickering or flashing may be

recorded. JVC KENWOOD assumes no responsibility with regard to the distinguishing or recording of

traffic lights.

• If coating is used on the windshield of the vehicle, recording quality may be affected.

• There is no guarantee that the device can record video in all conditions.

Setting the Date and Time

Set the date and time of the device.

Press the button to display the menu.

Press the / buttons to select "System", and press the

button.

▲ ▲▲▲ ▲

Press the buttons associated with the icons that appear.

Press the / buttons to select "Date/Time", and press the

button.

Press the / buttons to select an item , and press the button.

When "Use GPS time" was selected, the timezone settings is displayed.

Press the / buttons to select the timezone , and press the

button.

Press the / buttons to select the “Daylight Saving Time”, and

press the button.

Daylight Saving Time:

Off*/+1 hour/+30 min/-1 hour/-30 min

* Settings at the time of purchase

When "manual" was selected, the "Date/Time" is displayed.

See the following for information about operations.

Manually Setting the Date and Time

Do the processes until step 4 of "Setting the Date and Time", and

then select "manual".

Press the / buttons to select the items, (year, month, date,

hour, minute, and second), and then press the button.

▲ ▲▲▲ ▲

Press the buttons associated with the icons that appear.

Repeat the process for step 2 to change the values until "second".

Press the confirmation button with "second" selected.

Date/Time

year　month date

2017 / 08 / 20

hour minute second

16 ： 16 ： 18

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable

for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed of as

household waste.

Old electrical and electronic equipment and batteries should be recycled at a facility capable of

handling these items and their waste by products.

Contact your local authority for details in locating a recycle facility nearest to you.

Proper recycling and waste disposal will help conserve resources while preventing detrimental effects

on our health and the environment.

Declaration of Conformity with regard to the RE Directive 2014/53/EU

Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer: MITAC Digital Technology Corporation

No. 200, Wen Hwa 2nd Rd., Kuei Shan Dist. 33383 Taoyuan City, TAIWAN

English

Hereby, we declare that the radio equipment DRV-330 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of

conformity is available at the following internet address:

Français

Hereby, we declare that the radio equipment DRV-330 is in compliance with Directive 2014/53/EU. Le texte complet de la déclaration de

conformité de l’UE est disponible à l’adresse internet suivante :

Deutsch

Hereby, we declare that the radio equipment DRV-330 is in compliance with Directive 2014/53/EU. Der volle Text der EU-Konformitätserklärung

steht unter der folgenden Internetadresse zur Verfügung:

Nederlands

Hereby, we declare that the radio equipment DRV-330 is in compliance with Directive 2014/53/EU. De volledige tekst van de EU-

conformiteitsverklaring is beschikbaar op het volgende internetadres:

Italiano

Hereby, we declare that the radio equipment DRV-330 is in compliance with Directive 2014/53/EU. Il testo integrale della dichiarazione di

conformità UE è disponibile al seguente indirizzo internet:

Español

Hereby, we declare that the radio equipment DRV-330 is in compliance with Directive 2014/53/EU. El texto completo de la declaración de

conformidad con la UE está disponible en la siguiente dirección de internet:

Português

Hereby, we declare that the radio equipment DRV-330 is in compliance with Directive 2014/53/EU. O texto integral da declaração de

conformidade da UE está disponível no seguinte endereço de Internet:

Polska

Niniejszym oświadczamy, że urządzenie radiowe DRV-330 jest zgodne z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności UE jest dostępny

pod następującym adresem internetowym:

Český

Tímto prohlašujeme, že rádiové zařízení DRV-330 je v souladu se směrnicí 2014/53/EU. Úplné znění EU prohlášení o shodě je k dispozici na

následující internetové adrese:

Magyar

Ezennel kijelentjük, hogy a DRV-330 rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU megfelelőségi nyilatkozat teljes szövege a

következő internetes címen érhető el:

Hrvatski

Ovime izjavljujemo da je radio oprema DRV-330 u skladu s Direktivom 2014/53/EU. Cijeli tekst EU deklaracije o sukladnosti dostupan je na

sljedećoj internet adresi:

Svenska

Vi intygar härmed att radioutrustningen DRV-330 överensstämmer med direktiv 2014/53/EU. Den fullständiga texten till denna EU-försäkran om

överensstämmelse är tillgänglig på följande internetadress:

Precautions and notices

• Warning! Do not operate the device while driving. Using this product does not change the

requirement for a driver to take full responsibility for his or her behavior. This responsibility

includes observing all traffic rules and regulations in order to avoid accidents, personal injury or

property damage.

• For your own safety, do not operate the controls of the product while driving.

• A window mount is needed when using the recorder in a car. Make sure that you place the

recorder in an appropriate place, so as not to obstruct the driver’s view or deployment of airbags.

• Make sure that no object is blocking the camera lens and no reflective material is placed near the

lens. Please keep the lens clean.

• If the car’s windscreen is tinted with a coating, it may impact the recording quality.

• Connect the charger to a proper power source. The voltage requirements are found on the

product case and/or packaging.

• Do not use the charger if the cord becomes damaged.

• Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is

damaged or exposed to excess moisture.

Caring for your device

• Taking good care of your device will ensure trouble-free operation and reduce the risk of

damage.

• Keep your device away from excessive moisture and extreme temperatures.

• Avoid exposing your device to direct sunlight or strong ultraviolet light for extended periods of

time.

• Do not place anything on top of your device or drop objects on your device.

• Do not drop your device or subject it to severe shock.

• Do not subject your device to sudden and severe temperature changes. This could cause

moisture condensation inside the unit, which could damage your device. In the event of

moisture condensation, allow the device to dry out completely before use.

• The screen surface can easily be scratched. Avoid touching it with sharp objects. Nonadhesive

generic screen protectors designed specifically for use on portable devices with LCD panels may

be used to help protect the screen from minor scratches.

• Never clean your device with it powered on. Use a soft, lint-free cloth to wipe the screen and the

exterior of your device.

• Do not use paper towels to clean the screen.

• Never attempt to disassemble, repair or make any modifications to your device.

Disassembly, modification or any attempt at repair could cause damage to your device and even

bodily injury or property damage and will void any warranty.

• Do not store or carry flammable liquids, gases or explosive materials in the same compartment

as your device, its parts or accessories.

• To discourage theft, do not leave the device and accessories in plain view in an unattended

vehicle.

• Overheating may damage the device.

Cleaning the Device

• When the device is dirty, wipe it with a dry silicone cloth or other soft cloth. If the device is

very dirty, remove the dirt with a cloth with neutral cleaner on it and then wipe off the cleaner.

Wiping the device with a hard cloth or using using a volatile substance such as thinner or alcohol

may cause scratches, deformation, deterioration, or other damage.

• When the lens is dirty, gently wipe it with a soft cloth dampened with water. Rubbing the lens

strongly with a dry cloth may cause scratches.

Screen size

2.0inches Full color TFT

Operating voltage (DRV-330)

DC 5.0V

Current Consumption

430mA (Max.1A)

GPS Receiver

Built-in

G-sensore

Built-in

Collision sensitivity

0.5G to 3G (0.5G step)

Image sensor

1/2.7 Color CMOS sensor

Number of Pixel

2M Pixels(1920x1080)

Angles of view

Horizontal : 100°

Vertical : 52°

Diagonal : 111°

Lens

F2.0

Minimum object illuminance

0.7lux

Operating temperature

–10 °C to +60 °C

Recording resolution

1920 x 1080 Full HD(Max.2.0M)

Frame rate

27.5fps

Recording preservation timing

Continuous / Event / Parking

Recording Mode

1 / 3 / 5 min.

Video format

H.264(MP4)

Picture format

JPEG (Max.1920 x 1080)

Recording media

microSDHC card 4GB to 32GB Class 6 or higher

USB Port

mini USB-B type

Dimensions WxHxD (Main unit)

61mm x 54mm x 32mm

Weight (Main unit)

63g

Accessories

Car charger cord (3.5 m) x 1

Mounting bracket (double-sided tape) x 1

The specifications and design are subject to

change due to technological developments.

• The microSDHC logo is a trademark of SD-3C

LLC.

Suomi

Täten vakuutamme, että radiolaitteisto DRV-330 täyttää direktiivin 2014/53/EU vaatimukset. EU:n vaatimustenmukaisuusvakuutuksen teksti on

kokonaisuudessaan saatavilla seuraavasta Internet-osoitteesta:

Slovensko

Izjavljamo, da je radijska oprema DRV-330 v skladu z Direktivo 2014/53/EU. Celotno besedilo EU izjave o skladnosti je na voljo na sledečem

spletnem naslovu:

Slovensky

Týmto vyhlasujeme, že rádiové zariadenie DRV-330 je v súlade so smernicou 2014/53/EÚ. Úplné znenie vyhlásenia o zhode EÚ je k dispozícii na

nasledovnej internetovej adrese:

Dansk

Hermed erklærer vi, at radioudstyret DRV-330 er i overensstemmelse med direktiv 2014/53/EU. Den fulde ordlyd af EU-

overensstemmelseserklæringen er tilgængelig på følgende internetadresse:

Norsk

Herved erklærer vi at radioutstyret DRV-330 er i samsvar med direktiv 2014/53/EU. Den komplette teksten for EU-deklarasjonen om

overensstemmelse er tilgjengelig på følgende internett-adresse:

Ελληνικά

Δια του παρόντος, δηλώνουμε ότι ο ραδιοεξοπλισμός DRV-330 συμμορφώνεται με την Οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης

συμμόρφωσης ΕΕ είναι διαθέσιμο στην παρακάτω διαδικτυακή διεύθυνση:

Eesti

Käesolevaga teatame, et raadioseade DRV-330 on kooskõlas direktiiviga 2014/53/EL. ELi vastavusdeklaratsiooni täistekst on kättesaadav

järgmiselt veebisaidilt:

Latviešu

Ar šo deklarējam, ka radioiekārta DRV-330 atbilst direktīvas 2014/53/ES prasībām. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā tīmekļa

vietnē:

Lietuviškai

Šiuo dokumentu patvirtiname, kad radijo įranga „DRV-330“ atitinka Direktyvos 2014/53/ES reikalavimus. Visą ES atitikties deklaracijos tekstą

galima rasti šiuo interneto adresu:

Malti

B'dan, aħna niddikjaraw li t-tagħmir tar-radju DRV-330 huwa konformi mad-Direttiva 2014/53/UE. It-test sħiħ tad-dikjarazzjoni ta' konformità

tal-UE huwa disponibbli fl-indirizz tal-internet li ġej:

Українська

Таким чином, ми заявляємо, що дане обладнання радіозв’язку DRV-330 відповідає директиві 2014/53/ЄС. Повний текст декларації

відповідності ЄС можна отримати за інтернет-адресою:

Türkçe

Bu vesileyle, DRV-330 telsiz ekipmanının 2014/53/AB Yönergesine uygun olduğunu beyan ederiz. AB uyum beyanının tam metni aşağıdaki

internet adresinde mevcuttur:

Русский

Hereby, we declare that the radio equipment DRV-330 is in compliance with Directive 2014/53/EU. Полный текст декларации соответствия ЕС

доступен на следующем веб-сайте:

Limba română

Prin prezenta, declarăm că echipamentul radio DRV-330 este în conformitate cu Directiva 2014/53/UE. Textul complet al declarației UE de

conformitate este disponibil la următoarea adresă de internet:

Български език

С настоящото декларираме, че радио оборудването DRV-330 е в съответствие с Директива 2014/53/ЕС. Пълният текст на декларацията

за съответствие на ЕС е достъпен на следния интернет адрес:

URL: http://www.kenwood.com/cs/ce/eudoc/

DRV-330E-ENG-2nd-1220.indd 2 2018/12/20 17:17

Kenwood DRV-330 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Andere handleiding(en) van Kenwood DRV-330

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info