511254
9
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
9
English
When one of the situations occurs...
The APS indicator is shown for 1 second every 1 minute and starts
flashing 30 seconds before the System turns off.
Selecting the input source
Press one of the input buttons (DIGITAL1, DIGITAL2,
ANALOG) to select the input source.
DIGITAL1 (for the optical connection)
DIGITAL2 (for the coaxial connection)
ANALOG (for the analog connection)
Adjusting the volume
Press VOLUME +/–.
Adjusts the volume within the range of 0 (MIN) to 40 (MAX).
¤ CAUTION
Set the volume to the minimum level before starting any source. If the
volume is set to a high level, the sudden blast of sound may damage your
hearing and blow out the speakers.
Turning off the sound temporarily
Press MUTING.
To restore the sound, press the button again or press VOLUME + to
adjust the volume.
Maintaining steady volume level
You can set your desired volume level for different input sources to
avoid volume fluctuation when changing from one source to the
other—TruVolume (TVOL).
Press TVOL.
Each time you press the button, TruVolume is turn on and off (TVOL ON
and TVOL OFF scroll on the display).
Changing the display brightness
Press DIMMER.
Each time you press the button, the display brightness changes with the
following scrolling message:
DIMMER OFF (normal) \ DIMMER 1 (darker) \ DIMMER 2 (darkest)
Adjusting the sound level
You can adjust the bass and treble sound level within the range of –3
to +3.
1 Press BASS/TREBLE repeatedly to select the sound you
want to adjust.
Each time you press the button, BASS and TREBLE alternates on the
display.
– BASS: Adjusts the bass sound level.
– TREBLE: Adjusts the treble sound level.
2 Press UP or DOWN to adjust the level.
The change in the bass and treble sound level of the speakers differ
depending on the incoming signal of the input source.
Using the surround mode
You can listen to a more realistic sound than stereo sound using
surround—StudioSound HD (SSHD).
Press SSHD.
Each time you press the button, surround mode is toggled on or off
(SSHD ON or SSHD OFF scrolls on the display).
Playing back iPod
Connecting iPod
While the power of the main unit is turned off...
1 Push the tray (8) to open the dock for iPod.
2 Connect iPod to the connector.
You cannot connect iPod to the unit if it is covered by something or
with accessories attached. Remove them before connecting.
Keep iPod in a straight position while connecting/disconnecting it.
Do not carry the unit with iPod connected. It might cause damage to
the dock for iPod or you might drop iPod.
Do not touch or hit the iPod terminal pins or connector pins in the
dock for iPod directly. Doing so might cause damage to the connector
pins.
While the power is turned on, iPod can be charged.
Playing back
Press iPod 6.
While the power is turned off, simply pressing iPod 6 turns on
the power and plays back iPod.
iPod (not supplied)
EN_C-BX3[E]f.indd 9EN_C-BX3[E]f.indd 9 7/4/12 9:44:42 AM7/4/12 9:44:42 AM
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood C-BX3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood C-BX3 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Kenwood C-BX3

Kenwood C-BX3 Gebruiksaanwijzing - Nederlands - 12 pagina's

Kenwood C-BX3 Gebruiksaanwijzing - Deutsch - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info