686381
5
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
EN
1. PREFACE
1.1 GENERAL
Congratulations on your choice of the Kemparc SYN-series welding system. Reliable
and durable, Kemppi products are aordable to maintain, and they increase your work
productivity.
This user manual contains important information on the use, maintenance and safety of
your Kemppi product. The technical specications of the device can be found at the end of
the manual. Please read the manual carefully before using the equipment for the rst time.
For your safety and that of your working environment, pay particular attention to the safety
instructions in the manual.
For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi
dealer, or visit the Kemppi web site at www.kemppi.com.
The specications presented in this manual are subject to change without prior notice.
NOTE! Items in the manual that require particular attention in order to minimise damage and
personal harm are indicated with this symbol. Read these sections carefully and follow their
instructions.
Disclaimer
While every eort has been made to ensure that the information contained in this guide
is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi
reserves the right to change the specication of the product described at any time without
prior notice. Do not copy, record, reproduce or transmit the contents of this guide without
prior permission from Kemppi.
1.2 INTRODUCTION
KempArc SYN is a product family for welding automation that includes all welding devices
needed in robot welding. The KempArc SYN welding system includes the following devices:
• KempArc SYN 300, SYN 400 and SYN 500 are synergetic welding power sources
designed particularly for welding automation that are suitable for MIG welding with
direct current. There are three power types of power sources: the 300, 400 and 500
ampere models. For more information on using power sources and their functions, see
"Power source".
• RF 59 is a control panel that contains the programs and welding parameters needed
in controlling the welding hardware. The panel functions allow the user to control the
operation of the welding hardware and adjust its welding settings. The control panel is
located in the front panel of the welding power source. For more information on using
the control panel and its functions, see "Control panel".
• KempArc DT 400 is a wire feeding device that feeds welding wire to the welding robot
at the speed it requires at any time. For more information on using the wire feeder and
its functions, see "Wire feeder".
This guide presents the functions, operation and technical properties of the above devices.
The devices also include the KempCool 10 cooler, but its functions and features are presented
in a separate guide.
The KempArc Synergic hardware is connected to the welding robot control system with the
control unit on top of the power source.
3
KempArc SYN 300, 400, 500, DT 400 / © Kemppi Oy / 1117
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kemppi Kemparc SYN 300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kemppi Kemparc SYN 300 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info