686373
5
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
5
Robot Gun Mount T2, T4© Kemppi Oy 2017 1712
OPERATING MANUAL
5.4 Signs used in the documentation
Items in the manual that require particular attention, to
minimize damage and personal injury, are indicated with
a three-level notication and warning system. Read these
sections carefully, and follow the instructions.
Note: These items give the user a useful piece of
information.
Caution: A caution item describes a situation that may
result in damage to the equipment or system.
Warning: Warnings describe a potentially dangerous
situation. If not avoided, it will result in personal harm or
fatal injury.
5.5 Warning and notice signs
The following warning and notice signs can be found on
the product:
Read and observe the operating instructions!
These markings must always be legible. They must not be
covered, obscured, painted over, or removed.
5.6 Emergency instructions
In the event of an emergency, immediately interrupt the
following:
The power supply
The ow of compressed air
Further measures are described in the operating
instructions or in the documentation of other peripheral
devices.
5.7 Operation safety
Please study these operation safety instructions and
respect them when installing, operating, and servicing
the machine.
The welding arc and spatter
The welding arc harms unprotected eyes. Also be careful
with reecting ashes from the arc. The welding arc and
spatter burn unprotected skin. Wear safety gloves and
protective clothing.
Danger of re or explosion
Pay attention to re safety regulations. Remove ammable
or explosive materials from the welding location. Always
reserve sucient re-ghting equipment at the welding
location. Be prepared for hazards in special welding jobs –
for example, the danger of re or explosion in welding of
container-type work pieces.
Fire can break out from sparks even several hours after
the welding is done!
Cables
Always check the cables before operating the equipment.
Replace damaged cables without delay.
Damaged cables may cause injury or start a re. Connection
cables must not be compressed or come in contact with
sharp edges or hot work pieces.
The welding power circuit
Isolate yourself by using proper protective clothing, and
do not wear wet clothing. Never work on a wet surface or
use damaged cables. Do not place the MIG gun or welding
cables on the welding machine or on other electric
equipment. Do not press the MIG guns switch if the gun is
not directed towards a work piece.
Welding fumes
Make sure that there is sufficient ventilation during
welding. Take special safety precautions when welding
metals that contain lead, cadmium, zinc, mercury, or
beryllium.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kemppi A7 Robot Gun Mount T4 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kemppi A7 Robot Gun Mount T4 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info