778343
3
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
1060RC
DT istr (1060RC) 11/2020 REV 1 11/2020 3 / 4
ISTRUZIONI GENERALI DI MONTAGGIO E D'UTILIZZO
1. Controllare che la manopola del gas (6) sia chiusa completamente.
2. Controllare la presenza ed il buono stato della guarnizione all’interno della sede (8).
3. Inserire ed avvitare completamente la cartuccia all’interno dell’apposito porta cartuccia (5).
4. Aprire leggermente la manopola del gas (6) in senso antiorario e premere il pulsante dell’accensione (3). Ripetere l'operazione
in caso di mancata accensione.
5. Aumentare la potenza dell'apparecchio girando la manopola del gas (6) in senso antiorario. Per diminuire la potenza ruotare
la manopola del gas (6) in senso orario.
6. Per spegnere l’apparecchio, ruotare la manopola del gas (6) in senso orario fino alla chiusura della e valvola raggiungendo
così lo spegnimento dell’applicazione.
SOSTITUZIONE DELLA CARTUCCIA
1. La cartuccia deve essere sostituita all’esterno, in un ambiente ben aerato, lontano da fiamme libere, fiammelle pilota, piastre
elettriche e lontano da altre persone.
2. Assicurarsi che il rubinetto sia chiuso, svitare la cartuccia dall’apparecchio, controllare la presenza ed il buono stato della
guarnizione tra l’apparecchiatura e la cartuccia, avvitare la nuova cartuccia nell’apparecchio.
3. Mai gettare una cartuccia vuota nel fuoco.
SISTEMAZIONE DELL'APPARECCHIO
Prima di riporre o trasportare l‘apparecchio, svitare sempre la cartuccia dall’apparecchio.
Se l’apparecchio non viene usato, conservarlo in un posto ben ventilato, asciutto e privo di polvere.
Prima di riporre l’apparecchio in un luogo sicuro e asciutto, fare attenzione che si sia raffreddato e che abbia il volantino del gas
(6) chiuso.
MANUTENZIONE - RIPARAZIONE
1. Per pulire il corpo del vostro apparecchio, utilizzate un batuffolo di cotone imbevuto d'acqua calda e sapone. Mai utilizzare
dei prodotti abrasivi.
2. Per pulire il bruciatore, utilizzate una spazzola morbida.
Tutte le domande d'intervento dei servizi assistenza sono da formulare ai ns. centri di produzione di Parma Via Prampolini, 1/Q,
43044 Lemignano di Collecchio Tel. +39 0521/957111 Fax +39 0521/957195 - www.kempergroup.it - info@kempergroup.it
GB
Read these instructions for use carefully so as to familiarize yourself with the appliance before connecting it to its gas cartridge or
gas cylinder. Keep these instructions for future reference.
GENERAL WARNING / IMPORTANT
1. ART 1060RC: This device works only with direct pressure gas cartridge KEMPER 580SMINI.
2. It can be dangerous to try to use other gas cartridges.
3. Make sure the valve is closed before handling the equipment.
4. Always check that the seal, between the device and the cartridge, is in place and in good condition before connecting it to the
gas container.
5. Never use appliances with worn or damaged seals.
6. The appliance should be operated away from flammable materials and at a distance of 70 cm from furniture, walls and ceiling.
7. If there is a leak on your appliance (smell of gas) take it outside immediately into a well ventilated location, where the leak may
be detected and stopped. If you need to check for leaks on your appliance, do it outside. Do not try to detect leaks using
flames, use our item Revelgas 1726 or soapy water.
8. Do not modify the device: it can be dangerous and void the warranty and all liability.
9. Do not use the appliance if not complete all of its components.
10. Do not use an appliance which is leaking damaged or which does not operate properly.
11. CAUTION: Accessible parts may become very hot. Keep young children away from the appliance.
12. Ensure that the appliance is used in a well-ventilated area and that national requirements are being met, in order to ensure a
good supply of air for combustion and to prevent the formation of mixtures with dangerous levels of unburned gas.
GENERAL INSTRUCTIONS FOR USE AND ASSEMBLY
1. Check that the gas knob (6) is completely closed.
2. Check the presence and good condition of the seal inside the valve’s threaded area (8).
3. Insert and screw tight the cartridge iside the cartridge housing (5).
4. Slightly open the gas knob (6) counterclockwise and press the ignition button (3). Press again the ignition button in case of
appliance is not ignited.
5. Increase the power of the appliance by turning the gas knob (6) counterclockwise. To decrease the appliance power, turn the
gas knob (6) clockwise.
6. To turn off the appliance, turn the gas knob (6) clockwise until the valve closes.
CARTRIDGE REPLACEMENT
1. The cartridge must be replaced in a well ventilated area, outside, away from open flames, pilot flames and away from other
people.
2. Make sure the valve is closed, unscrew the empty cartridge from the appliance, check the presence and condition of the seal
between the appliance and the cartridge, screw the new cartridge inside the appliance.
3. Never throw an empty cartridge into the fire.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kemper 1060RC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kemper 1060RC in de taal/talen: Engels, Frans, Italiaans als bijlage per email.

De handleiding is 0.5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info