652967
17
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
EN | 17
EN
Even if the remote control is operated within the effective range, its operation may be impossible
if there are any obstacles between the appliance and the remote control.
If the remote control is operated near other appliances which generate infrared rays, or if other
remote control devices using infrared rays are used near the appliance, it may operate incor-
rectly.
Basic Functions
Clock Setting
1. To set the clock the unit must be in standby mode.
2. Press and hold for 2 seconds the CLOCK SET button to enter the clock setting mode. The dis-
play will show “12H” ashing.
3. Adjust time format (12H / 24H) by pressing the SKIP+ or SKIP- button.
4. Press the CLOCK SET button to conrm time format. The hours will start ashing.
5. Adjust hour by pressing the SKIP+ or SKIP- button. Press the CLOCK SET button to conrm.
The minutes will start ashing.
6. Adjust minute by pressing the SKIP+ or SKIP- button. Press the CLOCK SET button to conrm.
Alarm Setting
ALARM setting must be after the clock setting has been completed.
1. To set an alarm the unit must be in standby mode.
2. Press and hold for 2 seconds the AL 1 or AL 2 button (depending on whether you want to set
alarm 1 or alarm 2) to enter alarm set mode.
3. Adjust hour by pressing the SKIP+ or SKIP- button. Press the AL 1 (or AL 2) button to conrm.
4. Adjust minute by pressing the SKIP+ or SKIP- button. Press the AL 1 (or AL 2) button to conrm.
5. In the next step you can select the wake up type: Press the SKIP+ or SKIP- button to select
1 - buzz (to wake to buzzer)
2 - Fn (to wake to radio)
3 - usb (to wake to USB)
4 - sd (to wake to SD)
6. Press the AL 1 (or AL 2) button to conrm. The alarm is now set.
To activate an alarm, press the AL 1 or AL 2 button once while in standby mode. The display will
show “ALARM1” and/or “ALARM2”. You can select only one alarm, or both alarms.
To stop an active alarm, press the STANDBY button on the unit or the remote control. The alarm
will come on again the next day at the set time.
To deactivate an alarm press the AL 1 or AL 2 button once until “ALARM1” or “ALARM2” disap-
pears from the display.
Notes:
If the alarm is set to wake up to RADIO, the last played radio station will come on at the set time.
If the alarm is set to wake up to USB, SD or RADIO, make sure to set the volume at a level that
will wake you up. You may adjust the volume on the appliance.
If the alarm is set to wake up to BUZZER, the buzzer volume is xed and cannot be adjusted.
Snooze Function
The snooze function allows you to delay an active alarm for 10 minutes. To do so, press the SNOOZE
button once while the alarm is active. The alarm will stop and come on again after 10 minutes.
Sleep Function
The sleep function enables you to set a countdown timer after which the radio will turn itself into
standby mode automatically.
While listening to the radio or USB/SD, repeatedly press the SLEEP button to select a desired
countdown after which the radio will turn itself off automatically. “SLEEP” wil be shown in the
display.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Karcher Audio RA 2250 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Karcher Audio RA 2250 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info