554826
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
TP-83 programmable wireless thermostat 1 / 2 MKL51904
The TP-83 programmable wireless indoor thermostat
The TP-83 is a wireless indoor thermostat with a programmable
weekly heating schedule. It is designed for indoor temperature
regulation which balances economy with comfort. The device is
capable of recognizing warm-up persistence characteristics (within 2
days) and will adjust the settings accordingly so that a high level of
operational comfort is achieved. You need not find out how early the
heating should start in order to get to a comfortable temperature at the
desired time. The required timing is configured automatically.
Temperature adjustment can be performed by simply turning the
setting knob.
When combined with an Oasis wireless security system (Jablotron),
the following are possible:
Switching the heating ON and OFF remotely (by mobile phone,
remote control or Internet).
Disabling the heating when windows are open.
Informing the user about heating faults and frost threats (if the
temperature drops below a pre-configured value a warning SMS is
sent).
Informing on the occurrence of fire (when the temperature is above
a pre-configured value).
Tab
Button
Installation
The TP-83 should be mounted in a dry indoor location. Choose a
mounting location about 1.5 meters above the floor in an area with
good air circulation. Avoid places with draughts, dead air spots and
radiant heat from the sun or appliances. It should not be installed close
to any metal structure or other objects that may obstruct radio signal
transmissions.
1. Release the upper cover by pressing the plastic tab on the bottom
side of the housing
2. Mount the back part on to the desired location.
3. Insert the battery (the polarity is marked on the holder).
4. Close the thermostat.
Enrollment
Install and connect the receiving unit to the heating system. If the
receiving unit was purchased separately then the thermostat must be
enrolled to it – enter enrollment mode on the receiving unit (see its
manual) and either connect the battery to the thermostat or enter menu
M1 (both operations cause an enrollment signal to be sent).
Symbols on the display
Low battery
Heating ON
Time / temperature
display
Manual mode
Time adjustment
Programming
Service menu
Week days
Comfort temperature
Economy temperature
Scheduled time display
Adjustment and programming
All the required parameters can be configured in the adjustment
menu using the knob. The menu is divided into the following parts:
M1 manual temperature-adjustment
M2 setting the economical or comfortable temperature,
time adjustment
M3 weekly programming schedule
M4 service menu
You can enter the menu and scroll through M1 to M4 by pressing and
holding the knob. The desired submenu is selected by releasing the
knob.
Scrolling inside any particular menu M1 to M4 is done by turning the
knob. The currently displayed parameter can be adjusted by pressing
the knob briefly, turning the knob until the desired value is displayed,
and confirming the setting by re-pressing the knob (this will also cause
a return to the menu so that you can configure other parameters
immediately). The adjustment menu is escaped from by pressing the
knob while OK is displayed or automatically after approx. 30 seconds.
1. M1 – manual mode
If set to manual mode, the thermostat performs
fixed temperature regulation regardless of the
weekly schedule. The desired temperature can
be set within the range of t Lo to t Hi. The M1
menu is escaped from by pressing and holding the knob for 2 seconds.
Note: As mentioned above, entering the M1 menu causes an
enrollment signal to be sent.
2. M2 – temperature & time setting
If the M2 menu is entered, turning the knob will scroll through the
Economical temperature (
), Comfortable temperature ( ) and Time
(
) parameters followed by an OK option.
Mo
Each parameter can be entered by briefly pressing the knob. When
or is entered the displayed temperature flashes and can be
adjusted by turning the knob (re-pressing the knob confirms the
setting). The Time parameter adjustment is similar but requires three
steps – for the day, hour and minutes.
3. M3 – programming the weekly heating schedule
This mode allows you to program when the thermostat should switch
between Day (
) and Night ( ) operation. The heating schedule can
be programmed either for each day separately or just for working days
or just for the weekend or for all days together.
PRG
SuM o Tu We Th Fr Sa
PRG
SuSa
PRG
M o Tu We Th Fr
PRG
Mo
Enter the M3 menu, scroll to the desired option by turning the knob
and enter the schedule programming by briefly pressing the knob (this
erases the current schedule setting).
Mo
Mo
Mo
Schedule programming is done by marking
periods of time for which the Day heating
operation is requested. The marking bar is
shown at the bottom of the display, each
hour can be either marked or unmarked.
You mark or unmark by turning the knob.
The mark/unmark mode is displayed by
/
symbols, the currently programmed hour is
shown on the display (00 to 23). Switching
between mark/unmark modes is done by
pressing the knob (this applies when turning
clockwise, turning the knob anti-clockwise
always switches to unmark mode).
Turning the knob to the rightmost position
(following hour 23) will display an OK option.
Pressing the knob will then finish
programming.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron TP-83 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron TP-83 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info