554851
1
Verklein
Vergroot
Pagina terug
1/1
Pagina verder
Service tool – 01 2/2 MKR52001
The ST-01 telephone line simulator (Service tool - 01)
The ST-01 is designed as a telephone line simulator for the JA-80X communicator. Using this
tool makes it possible to record voice messages on the JA-80X using a common DTMF telephone
without a telephone line. The main advantage of this simulator is the quality of the recorded voice
message, which is not worsened by the influence of telephone lines and GSM RF interference.
Another advantage is that no other telephone line or mobile phone is necessary for recording voice
messages.
1. Connection
1. Use the RJ-44 cable supplied with the simulator to connect the RS-LINE data bus
connector on the ST-01 to the RS-LINE connector on the JA-80X.
2. Use the RJ-64 cable supplied with the simulator to connect the TEL2 connector on the
ST-01 to the telephone line input (LINE) on the JA-80X.
3. Connect the DTMF telephone to the TEL1 connector on the ST-01 (use the cable supplied
with the phone).
2. Voice message recording
1. Switch the OASiS system to service mode by entering * 0 + service code
2. Pick up the headset of the telephone connected to the ST-01 and enter sequence 7 2 on the
OASiS keypad. You will hear a beep in the headset. You are now in the voice message
recording menu.
3. All voice messages can be played by pressing 0. This mode can be cancelled anytime by pressing *
4. Press button 1 to record message no. 1 ”Alarm reports:”. (7.5 second message).
5. Press button 2 to record message no. 2 ”Burglary”. (2.5 second message).
6. Press button 3 to record message no. 3 ”Fire”. (2.5 second message).
7. Press button 4 to record message no. 4 ”Sabotage”. (2.5 second message).
8. Press button 5 to record message no. 5 ”Panic”. (2.5 second message).
9. Press button 6 to record message no. 6 ”Error”. (2.5 second message).
10. Press button 7 to record message no. 7 ”Welcome to OASiS”. (2.5 second message).
11. Press button 8 to record message no. 8 ”Enter your access code “. (2.5 second message).
12. Press button # to leave voice recording. The communicator will hang up.
To exit service mode press # on the system keypad.
The ST-01 must not be connected to a PSTN line!

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron ST-01 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron ST-01 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info