554801
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
JA-80IR wireless optical barrier 2 /2 MKU52302
A permanently lit LED on the right indicates that the beam has been
interrupted (or wrongly adjusted). The better the beam reception, the
longer the breaks between the LED flashes. When the LED stops
flashing, continue looking for the ideal position indicated by the highest
voltage measured on the voltmeter.
Setting up the electronic part of the barrier
Both units are equipped with setting switches. The switch located on the side
of the units (on the optical part) allows barrier beam modulation frequency
adjustment from 1 to 4. This setting is useful only for a combination of
multiple JA-80IR barriers where a problem with interference might appear.
For more information see the original user.
There is a DIP switch with five switches. The first two positions are used to
set the reaction time to an interruption of the beam. The shorter the time, the
more precise the interruption detection, but also the greater the susceptibility
to false alarms during worsened optical conditions (snow, fog, ...)
Fig. 7 Reaction time setting
It is possible to set a 2-minute sleep time after an alarm (beam
interruption) in order to save batteries. This setting is done by switching
switch no. 3 (receiver unit), or no. 1 (transmitter unit) to the ON position.
Switches 4 and 5 (receiver unit), or better 2 and 3 (transmitter unit) are
set as a default and you should leave them in the OFF position for the
correct functioning of the device.
Operation testing
The LEDs on the barrier have the following indication functions
Receiver Transmitte
r
Low battery LED Low battery LED
Alarm LED Power LED
Fig 8 LEDs on the units
The signal battery low LEDs flash when the batteries in the unit are low.
Both batteries (SAFT LSH20 lithium batteries) should always be
replaced at the same time.
The alarm LED flashes during beam blocking.
The power LED flashes when the battery in the transmitting unit is OK.
Receive
r
Transmitter
Fig. 9 Barrier function test
Perform a barrier test in three places (A B and C). The setting is
completed only if the barrier reacts successfully in all three positions.
You should also check the signal transmission to the system control
panel. Only then is it possible to put back the unit covers and secure
them.
Checking the status of and replacing batteries
The detector checks battery status automatically and if the batteries are
running low, it informs the system. The detector remains fully functional.
The batteries should be replaced as soon as possible (within 1 week).
Use SAFT LSH20 batteries exclusively and always replace both at the
same time.
Technical specifications
Power supply 4x LSH20 type lithium batteries (3.6 V 13 Ah)
Average battery lifetime approx. 3 years (with 120 s energy saving mode)
Operating frequency 868 MHz
Radio range – distance from the control panel up to 300 m with direct visibility
Optex barrier parameters
Distance (max.) between the barrier units 60 m
Barrier installation height 0.7 – 1.0 m
Object motion speed as set by user
Battery saving timer 120 s
Enclosure IP55
Max. relative humidity of the environment 95%
Weight 1620 g
Environment according to EN 50131-1 class IV
Operating temperature range -20°C to +60°C
Security grade according to OPTEX
Comply with ETSI EN 300220, EN 50130-4, EN 55022, EN 60950-1
Can be operated according to ERC REC 70 03
JABLOTRON ALARMS Inc. hereby declares that the JA-80IR
wireless optical barrier is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC. The original of the conformity assessment can be
found at www.jablotron.com
- Technical Support section
Note: Although this product does not contain any harmful
materials we suggest you return the product to the dealer or
directly to the producer after use.
88,1
217
162,5
83,5
Fig. 10 Unit dimensions
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron JA-80IR bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron JA-80IR in de taal/talen: Engels als bijlage per email.

De handleiding is 0,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info