56505
39
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
36
Tuner operations
When the stereo FM program currently tuned in is noisy,
you can change the FM reception mode to improve the
reception.
7While listening to an FM station
Press FM MODE.
The FM reception mode appears on the display window.
Each time you press the button, the FM reception mode
changes.
AUTO:
When a program is broadcast in stereo, you will hear
stereo sound. (The ST indicator lights on the display
window.) When in monaural, you will hear monaural
sound. This mode is also useful to suppress static noise
between stations.
MONO:
Reception will be improved although you will lose the
stereo effect. (The MONO indicator lights up on the
display window.) In this mode, you will hear noise until
you are tuned in to a station.
The Radio Data System allows FM stations to send an
additional signal along with their regular program signals.
For example, the stations send their station names, as well
as information about what type of program they broadcast,
such as sports or music, etc.
With the system, you can receive the following types of
Radio Data System signals:
PS (Program Service): Shows commonly known station
names.
PTY (Program Type): Shows the types of programs
broadcast.
RT (Radio Text): Shows text messages the station sends.
Enhanced Other Network: See page 38.
NOTE
The Radio Data System is not available for AM (MW)
broadcasts.
The Radio Data System may not operate correctly if the
station tuned in is not transmitting
Radio Data System
signals properly or if the signal strength is weak.
7 To show the Radio Data System signals information
Press DISPLAY while holding SHIFT,
while listening to an FM station.
Each time you repeat the procedure, the indication on the
display window changes.
PS (Program Service):
While searching, “PS” appears and then the station
names will be displayed. “NO PS” appears if no signal is
sent.
PTY (Program Type):
While searching, “PTY” appears and then the type of the
broadcast program will be displayed. “NO PTY” appears
if no signal is sent.
RT (Radio Text):
While searching, “RT” appears and then text messages
the station sends will be displayed. “NO RT” appears if no
signal is sent.
Frequency:
Station frequency (non-Radio Data System service).
About characters shown in the display window
When PS, PTY, or RT signals appear in the display window,
some special characters and marks may not be displayed
correctly.
NOTE
If searching finishes immediately, “PS”, “PTY”, and “RT” will
not appear on the display window.
Searching for a program by PTY code
One of the advantages of the Radio Data System service is
that you can locate a particular kind of program from the
preset channels (see page 35) by specifying the PTY code.
7 To search for a program using the PTY code
NOTE
Before you start operation:
Press FM/AM on the remote control to select an FM
station.
The PTY Search is only applicable to preset stations.
To stop searching any time during the process, press PTY
SEARCH while searching.
There is a time limit for doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
Selecting the FM reception
mode
Using the Radio Data System
when receiving FM stations
See page 35 for button locations.
EN_TH-U1[B]-03body.fm Page 36 Wednesday, July 25, 2007 4:06 PM
39

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC TH-U1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC TH-U1 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van JVC TH-U1

JVC TH-U1 Gebruiksaanwijzing - Nederlands - 86 pagina's

JVC TH-U1 Gebruiksaanwijzing - Deutsch, Français - 86 pagina's

JVC TH-U1 Gebruiksaanwijzing - Italiano - 86 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info