31027
11
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
January 31, 2003 6:13 pm Page 11
11
Master Page: Right
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette, remove its record
safety tab. To record on it later, cover
the hole with adhesive tape.
Basic Recording
A
Load a cassette
Make sure the record safety tab is intact. If not, cover the hole
with adhesive tape before inserting the cassette.
The recorder turns on, and the counter is reset, automatically.
B
Select recording channel
Press PR+/ or the number keys.
You can select channel in the stop mode or recording pause
mode.
C
Set tape speed (HR-V505/V506/V507E only)
Press SP/LP (p). The current setting for the tape speed appears
on the screen for about 3 seconds. Press SP/LP (p) again to
change the setting while tape speed is displayed.
D
Start recording
Press 7.
If the tape reaches its end during recording, the recorder stops
recording, rewinds the tape and ejects the cassette, then enters
the standby mode automatically.
Recording Features
Tape Position/Time Counter
Press OK repeatedly to display the tape position and time
counter on the screen. To reset the time counter, press 0000.
NOTES:
Set OSD to ON to display the indications on the screen.
(
5)
Depending on the type of tape used, the tape position may not
appear right away.
Memory Stop Facility
The recorder stops automatically when rewinding the tape and the
counter reaches M 0:00:00. If you set the counter to
M 0:00:00 before the playback or recording, you can easily
access the pre-selected position by using the time counter.
A Press OK repeatedly to display the counter on the screen.
B Press 0000 to reset the counter before playback or recording.
C Start playback or recording.
D Press 3 after playback or recording. The tape rewinds and
stops automatically when the counter reaches to M 0:00:00.
Watching one programme while recording another
If your recorder is connected to the TV via the AV connection,
press TV/VCR.
Once recording is in progress, all you need to do is to set the
channel controls on the TV for the station you wish to view.
The programme selected with the TVs channel controls appears
on the screen while the one selected with the PR+/ is recorded
on the tape.
If a decoder is connected to the recorder, you can select a
scrambled channel as well with the TV channel controls.
Specifying recording length
Instant Timer Recording (ITR)
During recording, press 7 (ITR) repeatedly until the desired
recording length appears on the screen.
Each time you press the button, recording length increases in
30-minute intervals (up to 9 hours).
The recorder enters the standby mode after recording is
finished.
To cancel an ITR, press 8 on the remote control or 0 on the
recorder.
Receiving stereo and bilingual programmes
(HR-V505/V506/V507E only)
Your recorder is equipped with a Sound-Multiplex decoder (A2)
and a Digital stereo sound decoder (NICAM) as well, making
reception of stereo and bilingual broadcasts possible.
To listen to a stereo programme, set AUDIO to STEREO.
(
5)
To listen to a bilingual programme, set AUDIO to LEFT or
RIGHT. (
5)
To listen to the standard (regular monaural) audio while
receiving a NICAM broadcast, set AUDIO to MONO.
(
5)
NOTE:
Set OSD to ON to display the indications on the screen.
(
5)
To record stereo and bilingual programmes (A2)
Stereo programmes are automatically recorded in stereo on the
Hi-Fi audio track (with the normal audio track recording mixed
L and R channel sound).
Bilingual programmes are automatically recorded in bilingual
on the Hi-Fi audio track. The main soundtrack is recorded on
the normal audio track.
To record NICAM stereo and bilingual programmes
The NICAM audio programme is recorded on the Hi-Fi audio
track, and the standard audio programme on the normal audio
track.
NOTES:
Set NIC to AUTO. (
5)
If the quality of stereo sound being received is poor, the
broadcast may be received in monaural with better quality.
Before playing back a programme recorded in stereo, or a
bilingual programme, set AUDIO to the appropriate mode.
(
5)
Recording
Turn on the TV and select the AV mode or video channel.
During recording
Pause recording
Press 9.
Press 9 to resume recording.
You can select channel in the recording pause mode.
There will be a loss of color, or the picture will be distorted
where the channel is changed.
Stop recording
Press 8 on the remote
control.
OR Press 0 on the recorder.
Record safety tab
HR-V505_205E-001EN.fm Page 11 Friday, January 31, 2003 6:13 PM
11

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

JVC-HRV505

Zoeken resetten

  • Ik zal graag een handleiding willen hebben in het nederlands
    bij voorbaat dank Gesteld op 21-3-2010 om 19:23

    Reageer op deze vraag Misbruik melden
    • Ik zou graag een Nederlandse handleiding willen hebben van een JVC videorecorder type HR-V505E. Wie kan mij daaraan helpen?
      Hans Bootsma.
      020-6413964
      E-Mail: hansenriabootsma@hetnet.nl Geantwoord op 5-8-2012 om 09:55

      Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC HRV505 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC HRV505 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van JVC HRV505

JVC HRV505 Gebruiksaanwijzing - Nederlands - 16 pagina's

JVC HRV505 Gebruiksaanwijzing - Deutsch - 16 pagina's

JVC HRV505 Gebruiksaanwijzing - English - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info