57103
33
Verklein
Vergroot
Pagina terug
1/37
Pagina verder
(No.YA092B)1-33
4.7.3 MTS CIRUT
Item
Measuring
instrument
Test point Adjustment part Description
WHITE
BALANCE
(High light)
adjustment
Signal
generator
Remote
control unit
[1. ADJUST]
S030:R DRIVE
(Red drive)
S031:G DRIVE
(Green drive)
S032:B DRIVE
(Blue drive)
(1) Receive a NTSC all-white (75% white) pattern
signal.
(2) Set VIDEO STATUS to [STANDARD].
(3) Set ASPECT to [FULL].
(4) Set COLOR TEMPERATURE to [LOW].
(5) Select [1.ADJUST] from the SERVICE MENU.
(6) Fix one of < S030 > (Red drive), < S031 > (Green
drive) or < S032 > (Blue drive). Then, lower the other
two that are not fixed so that the all-white screen is
equally white throughout.
(7) Adjust one or more of < S030 > (R.DRIVE), < 031 >
(G DRIVE) and < 032 > (B DRIVE) to set values [128].
(8) Check that white balance is properly tracked from
low light to high light. If the white balance tracking is
deviated, adjust to correct it.
(9) Press the [MUTING] key to memorized the set
value.
Item
Measuring
instrument
Test point Adjustment part Description
MTS INPUT
LEVEL
adjustment
Remote
control unit
[1. ADJUST]
T001:IN LEVEL
(1) Select the [1.ADJUST] from the SERVICE MENU.
(2) Select the <T001> (IN LEVEL).
(3) Set the <T001> (IN LEVEL) to initial setting value.
(4) Press the [MUTING] key to memorized the set
value.
MTS
SEPARATION
adjustment
TV audio
multiplex
Oscilloscope
Remote
control unit
[1. ADJUST]
T002: LOW SEP
T003: HIGH SEP
(1) Input stereo L signal (300Hz) from the TV audio
multiplex signal generator to the antenna terminal.
(2) Connect an oscilloscope to L OUTPUT pin of the
AUDIO OUT, and display one cycle portion of the
300Hz signal.
(3) Change the connection of the oscilloscope to R
OUTPUT pin of the AUDIO OUT, and enlarge the
voltage axis.
(4) Select <T002> (LOW SEP.).
(5) Set the initial setting value of <T002> (LOW SEP.).
(6) Adjust <T002> (LOW SEP.) so that the stroke
element of the 300Hz signal will become minimum.
(7) Change the signal to 3kHz, and similarly adjust
<T003> (HIGH SEP.).
(8) Press the [MUTING] key to memorized the set
value.
L-Channel
signal waveform
R-Channel
crosstalk portion
Minimum
1 cycle
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC HD-52Z585 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC HD-52Z585 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info