28358
29
Verklein
Vergroot
Pagina terug
1/55
Pagina verder
22
4.3 SELECTING A RANGE
The actual range scale and range rings interval is shown in the upper left corner
of the display. Press the RANGE key for an increased range scale, or key
for a decreases range scale. The selected range automatically determines the
proper number and distance between the range rings.
4.4 ADJUSTING RECEIVER SENSITIVITY
Press the J-DIAL until GAIN appears highlighted on the upper right corner of
the display. Rotate the J-DIAL clockwise or counterclockwise, to vary the gain
and thus control the strength of echo returns on the radar screen. An on-screen
bar indicates the gain level selected for display. The proper setting is when the
background noise is just visible on the screen.
4.5 ADJUSTING TUNING
The RADAR 3000 is setting Auto Tune mode at the power ON. If wish to
manual tuning, required to select Manual Tune mode by using menu (Refer to
4.27).
Press the J-DIAL until the TUNE appears highlighted on the upper right corner
of the display. Rotate the J-DIAL clockwise or counterclockwise, to maximize
the target echo. If land targets are not within the radar’s range, adjust the control
for maximum sea clutter. The on-screen tuning indicator will shown the strength
of tuning peak conditions is turned for maximum deflection. Normally, tuning
is performed on the 3 NM range scale or higher. Minor readjustment may be
necessary after the radar has warmed up 10 minutes.
OPERATION
22
4.3 SELECTING A RANGE
The actual range scale and range rings interval is shown in the upper left corner
of the display. Press the RANGE key for an increased range scale, or key
for a decreases range scale. The selected range automatically determines the
proper number and distance between the range rings.
4.4 ADJUSTING RECEIVER SENSITIVITY
Press the J-DIAL until GAIN appears highlighted on the upper right corner of
the display. Rotate the J-DIAL clockwise or counterclockwise, to vary the gain
and thus control the strength of echo returns on the radar screen. An on-screen
bar indicates the gain level selected for display. The proper setting is when the
background noise is just visible on the screen.
4.5 ADJUSTING TUNING
The RADAR 3000 is setting Auto Tune mode at the power ON. If wish to
manual tuning, required to select Manual Tune mode by using menu (Refer to
4.27).
Press the J-DIAL until the TUNE appears highlighted on the upper right corner
of the display. Rotate the J-DIAL clockwise or counterclockwise, to maximize
the target echo. If land targets are not within the radar’s range, adjust the control
for maximum sea clutter. The on-screen tuning indicator will shown the strength
of tuning peak conditions is turned for maximum deflection. Normally, tuning
is performed on the 3 NM range scale or higher. Minor readjustment may be
necessary after the radar has warmed up 10 minutes.
OPERATION
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JRC Radar3000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JRC Radar3000 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info