28356
65
Verklein
Vergroot
Pagina terug
1/148
Pagina verder
64
Section 3 Operation
TRAILS
OFF
0.5MIN
1 MIN
3 MIN
6 MIN
CONTINUOUS
EXPANDER
OFF ON
PROCESS
OFF
PROCESS1
PROCESS2
PROCESS3
•Select the “EXPANDER” in RADAR SETTING menu and push the
Joystick
, the “EXPANDER” pull-down menu is displayed. Change
settings to ON/OFF by
Joystick
right or left and push
Joystick
.
PROCESS
This feature allows the operator to detect a weak signal target or to
detect a target in the sea clutter.
Selecting “OFF” is no video processing. “PROCESS1” is used to
detect a weak echo. “PROCESS2” and “PROCESS3” are used to scan
correlation mode for use to detect a target in the sea clutter.
“PROCESS3” is more effective than “PROCESS2” but response is
slow.
•Select “PROCESS” in RADAR SETTING menu and push the
Joystick
to display the “PROCESS” pull-down menu. Select setting
by
Joystick
up or down and push
Joystick
.
Note:
•When PROCESS2 or PROCESS3 is used, an object moving with a high
speed is displayed dimly.
“PROCESS” is a very useful feature in the North stabilized or
Course stabilized heading mode.
Note:
•Notice that when “PROCESS” is used, a target that is moving with a
relatively higher velocity than that of your own ship may provide weaker
echoes than actual ones in the display or may provide no echoes of the
target itself.
TRAILS
This feature allows the operator to see the past history of target
movement or behind the moving targets. Selecting “OFF” is no trails.
The numerical selections, 0.5, 1, 3, and 6, represent the length of the
trail time” in minutes. For example, if 3 minutes is selected as the
interval, the trail presents the last 3 minutes of the target movement.
This provides a visual indication of a targets relative speed and course.
“CONTINUOUS” provides a continuous trail.
If range scale or bearing mode is changed, or offset display position
by the offset function, or changed display mode “RADAR” full to
“RADAR/CHART”, the trails will be cleared and new trails will be
redrawn to the screen.
The trails are drawn for anything that move on screen, including
sea gulls, sea clutter, buoys, lobsterpots, and shoreline. In general, it is
better to use the trails feature away from harbor and the shoreline to
avoid a cluttered display and to concentrate on trails of target vessels.
If own vessel changes the course all trails are influenced in HUP
mode, it is better to use the trail feature in NUP mode or CUP mode.
•Select the “TRAILS” in RADAR SETTING menu and push the
Joystick
, the “TRAILS” pull-down menu is displayed. Select settings
by
Joystick
up or down and push
Joystick
.
65

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JRC Radar1800 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JRC Radar1800 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info