701353
8
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
12W7-3
Free Air Resonance (Fs): 27.2 Hz
Electrical “Q” (Qes): 0.514
Mechanical “Q” (Qms): 7.807
Total Speaker “Q” (Qts): 0.482
Equivalent Compliance (Vas): 2.33 cu. ft. (66.0 ltrs)
One-Way, Linear Excursion (Xmax)*: 1.15 in. (29 mm)
Thermal Power Handling (Pt): 1000 Watts Continuous
Reference Efficiency (no): 0.249 %
Efficiency (SPL @ 1W/1m): 86.2 dB
DC Resistance (Re): 2.47Ω
Effective Piston Area (Sd): 84 sq. in. (0.0542 sq. m)
Nominal Impedance (Znom):
* Xmax specifications are derived via one-way voice coil overhang method with
no correction factors applied.
Infrasonic Filter:
Turn “O” for Sealed Enclosure.
Turn “On” for Ported Enclosure and
set the knob to “25” Hz.
Bass EQ:
Generally not necessary in W7 applications (we recommend defeating it by
switching the “Bass EQ” switch to “O”). May be used with Remote Bass
Control to provide some user controllable broad bass boost. When used in this
manner, setQ” to “1.1”, setCenter Freq.to “45” Hz, “Boostis defeated by
connection of Remote Bass Control.
Input Sensitivity Controls:
Proper adjustment of these controls is critical!
For virtually all aftermarket head units,
set “Input Voltage” to “Low.
See “Input Sensitivity Setting Guide”
on pg. 14 for precise setting instructions.
Dual Mono Speaker
Output Connections:
Connect wire directly to “+”
and “–” “Subwoofer Output
connections and to the W7.
Remote Bass Port:
Permits connection of an
optional remote bass boost
controller (RBC-1), giving you
control over the boost of the
parametric EQ from the front
of the vehicle. The RBC-1
controller is sold separately.
Amp Low-Pass Filter:
SetMode/Slopeswitch to “24dB”.
Set “Filter Freq. (Hz)” knob to “85”.
Lower settings are likely to result in a
poor transition between the upper
response of the W7 and the lower
response of the mid-bass speakers.
Amplier Input:
Connect RCA-type
cables from the head
unit (or processor) to
these two jacks.
Use both jacks
(with a Y-adapter
if necessary).
Output Polarity:
Carefully listen to the sub-bass to
mid-bass transition with music that
has strong mid-bass content. Select
the switch position which gives the
smoothest, most natural mid-bass
response. If using multiple 1000/1’s
on multiple subwoofers, make sure
this switch is set to the same position
on all ampliers.
JL Audio 1000/1v2:
These settings are intended
as a “baseline” for tuning your
system. Depending on your
vehicle and your preferences,
some variation in the crossover
and bass control settings may
be necessary for optimum
performance. (See settings
on page 10 for 500/1.)
RECOMMENDED CONTINUOUS RMS POWER RANGE FOR ONE SUBWOOFER DRIVER:
500W 750W 1000W 2000W 4000W250W
= position of knob
= position of switch
= switch with two possible positions
= setting will vary (see sidebar)
Amplifier Recommendation: 1000/1v2 (pictured), HD750/1,
500/1v2 or G-MAX
8
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JL Audio 10W7 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JL Audio 10W7 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info