477049
4
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
3/34 LM430 + LM440G ~ LM440F
FUNCTIONS (FRONT)
1. POWER SWITCH: used to switch the unit ON/OFF.
2. DIMMER CHANNELS: these are 4 faders used to set the individual dimming levels of the 4 channels.
Below each fader there’s a flash button to set the output of the corresponding channel to 100% (full) for
as long as the button is pressed. The flash buttons all have backlight so you can easily monitor the
output of each channel.
3. SWITCH CHANNELS: these buttons are used to switch 4 individual light effects ON/OFF. To be able to
use these buttons you must connect a separate switch pack to the DMX-output of the unit. (DMX
address on the switch pack must be set to 005)
4. MODE SELECT: used to select 1 of the 4 user modes:
HOLD DIM: This mode can be used to control the dimming levels of projectors on a small stage.
The 4 faders (2) can be used to set the dimming level of each channel individually.
HOLD SOUND: the music is divided into 4 different frequency ranges (bass, middle, high, anti-
bass). Each of the four output channels will respond to a different frequency range.
PROGRAM SOUND: The chaser program selected with the program select” button (6) will be
displayed. The chaser speed is synchronized to the rhythm of the beat.
PROGRAM SPEED: The chaser program selected with the program select” button (6) will be
displayed. The chaser speed can be adapted with the speed fader (12).
5. MODE SELECT INDICATOR: shows which of the 4 modes is currently active.
6. PROGRAM SELECT: When you selected 1 of the 2 program modes (4) then you can use the program
select button to choose the program you like. Nine different chaser programs (from 1 to 9) can be
selected. Program 0 (zero on the display) is a random program.
7. PROGRAM DISPLAY: shows which chaser program is currently selected.
8. MASTER DIMMER: controls the overall dimming level of the 4 channels.
9. FULL SWITCH: use this button to set the output of the 4 channels to 100% (full) for as long as the
button is pressed.
10. BACKGROUND LEVEL: with this fader you can set the background level (minimum output level) of the
4 dimmer channels. This can “soften” the chaser effects so they become less aggressive.
Attention: don’t set this fader to maximum, you will not be able anymore to see the chaser patterns or
set proper dimming levels for the 4 individual channels.
11. STANDBY SWITCH: used to cutoff (blackout) the output of the 4 dimmer channels. The 4 switch
channels are not affected.
12. PROG SPEED CONTROL: When the “program speed” mode (4) is selected, you can change the speed
of the selected chaser program (6) from slow to fast or very fast (13).
13. SPEED x10 BUTTON: Used to multiply/divide by 10 the speed selected with the speed fader (12).
14. AUDIO SENSITIVITY: used to adjust the input sensitivity of the internal microphone or external audio
inputs. Adjust the level until the sound activated functions work nicely to the rhythm of the music.
15. INTERNAL MICRO: the internal microphone is installed behind this opening.
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
4/34 LM430 + LM440G ~ LM440F
FUNCTIONS (REAR)
LM430
LM440G ~ LM440F
16. SOUND SOURCE SELECT: used to select which audio input will be used to synchronize the sound
related functions:
BUILT-IN MICRO: use this function when the music playback level is high enough so the internal
microphone can easily capture the sound. This is the easiest way to use the sound functions.
AUDIO INPUT: use this function when the sound level is rather low. In this case don’t forget to
connect the audio input connectors (17)!
17. AUDIO INPUT: when the sound source selector (16) is set to AUDIO INPUT” you will have to connect
these cinch/RCA connectors to an analog audio signal ranging from 200mV to 1000mV. In most cases a
record output or secondary master on your mixer will do.
18. DMX OUTPUTS: used to connect the light modulator to DMX power packs. You can use the 5pin XLR or
3pin XLR connectors. Both connectors carry the same signals, they only have a different pinning layout.
In most cases however you will use standard XLR-3pin male/female cables. Both the dimmer and switch
channels are available on these outputs:
DIMMER CHANNELS: are assigned to DMX addresses 001 to 004. Please set the starting
address of the connected dimmer pack to 001.
SWITCH CHANNELS: are assigned to DMX addresses 005 to 008. Please set the starting
address of the connected switch pack to 005.
Hint: You can connect all kinds of dimmer/switch packs, however for mobile applications we suggest
using the JB Systems
®
PB41/STD powered DMX-bars. You can easily set each channel in switch or
dimmer mode. Moreover you can directly fix your projectors and/or light effects to these powered DMX-
bars.
19. POWER INPUT: this input depends on the model number of the light modulator:
LM430: low voltage input, connect the supplied AC adapter here. If you should use another
adapter, please make sure the output produces 15Vac (>1A) with positive pole (+) in the center of
the connector.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JBSystems LM440 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JBSystems LM440 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 2,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info