669627
30
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
30
English
5. After 15-20 seconds, when the led for the correct temperature (15a) goes on, place the mug, filled in for its
half with cold milk, under the steam turbo cappuccino maker (6).
IMPORTANT In order to obtain a better cappuccino, make sure that the milk and the mug are cold.
6. Turn slowly the steam knob (4) anticlockwise to make the steam come out.
IMPORTANT More you open the knob, higher will be the steam pressure.
N.B. Do not release steam for more than 60 seconds.
7. Move the mug with circular movements and make sure that the tip of the steam nozzle is slightly immersed in
the milk once the foam will start to grow. Do not make the milk boil.
Once the milk has been properly frothed, turn the knob clockwise to stop the steam and remove the mug. Push
the steam lever (15) on the position “O”.
8. Pout the frothed milk on the coffee. Decorate with cacao, cinnamon, Muscat nuts and then serve.
9. Place an empty cup on the tray without putting the filter holder under the brewing group. Set the coffee lever (14)
on the position “I” and fill the cup with water. Once the cup is full, push the coffee lever (14) on the position “O”.
Now you can make another coffee.
11.6.1 – MAKING CAPPUCCINO WITH THE AUTOMATIC CAPPUCCINO MAKER (OPTIONAL)
Before turning on the machine, replace the turbo steam
nozzle (6) with the Automatic Cappuccino maker as
follows:
1. make sure the steam/hot water knob (4) is closed.
2. loosen (anticlockwise) the upper locking ring (A) of the
turbo steam nozzle (6) (Photo 1).
3. slide the turbo steam nozzle (6) down and off the steam
pipe.
4. slide the Automatic Cappuccino maker onto the steam
pipe up to the stop and tighten the locking ring (clockwise).
After having mode espresso in a cappuccino cup and
carried out all the normal steps to bring the machine to
the proper temperature for steam production, proceed as
follows:
1. briefly open and close two or three times the steam/hot
water knob (4) until only steams comes out of the Automatic
Cappuccino maker.
2. fill a tall, narrow container halfway with cold milk.
3. put the rubber uptake tube (B) (Photo 2) of the Automatic Cappuccino maker into the milk.
4. place the cup with the espresso under the spout of the Automatic Cappuccino maker and open the steam
knob (4) (anticlockwise) to begin producing thick, hot, frothy milk. When the cup is full, close the steam knob (4)
(clockwise).
You can adjust the milk froth by acting on the pin (C) (photo 2), Cappuccino Automatic to have the desired
consistency of cream. For a cream with greater volume, move the plug upwards (photo 2).
When you are done making cappuccino you must clean milk residues from the Automatic Cappuccino maker.
Important to ensure that the machine functions properly, do produce steam for
more than 60 seconds.
Attention: for the correct machine operating, please do not release steam
longer than 60 seconds.
A
FIG. 1
A
B
C
FIG. 2
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Isomac GIADA II bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Isomac GIADA II in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 2,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info