578869

Irox JKT-3R Handleiding

1
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
KSPO: 1102-10
IROX OST13-MANUAL 3(Eng)
SIZE:W100 x H100(mm)
BY Lai HZ 23/7/10
JKT-3R
Version 1.1
Page 29
Page 30
Page 30
Page 31
Page 33
Page 34
Page 36
Page 36
Page 36
Page 37
Page 37
Page 38
Page 38
Page 39
Operating Instructions
Table of contents
1. Introduction
2. Operating elements
2.1 LCD display
2.2 Keys / Switch / Battery compartment
3. Putting into operation
4. Radio thermometer
5. Operation
5.1 Thermometer
5.1.1 Reading of the temperature from each channel
5.1.2 MIN/MAX memory
6. Change of battery
7. Care instructions
8. Support
9. Technical data (display unit)
1. INTRODUCTION
Meteocentrale.ch is the weather forecast website operated by Meteomedia Ltd.
Meteomedia is one of the leading weather services in Europe and, with its own Severe Weather
Centres in Switzerland and in Germany, among other things, specialist for modern early
warning systems for extreme weather conditions.
The core of the company is the private weather measurement network. It is one of the biggest
measurement networks in Europe.
Irox, market leader in the manufacturing of measuring devices, and Meteomedia have
developed a joint product line that convinces with its high quality measurements, simple
handling and elegant design.
The JKT-3R is a high-quality thermometer that gives you the absolutely unique feature
of choosing between three different max/min memory functions. The recording is done
independently for each of the 6 channels in total. The individual scanning of the 5 radio
sensors also makes operation transparent and calculable.
Please read the instructions carefully. They contain some useful and interesting information that
go beyond a mere explanation of how to operate the device.
2. OPERATING ELEMENTS
2.1 LCD DISPLAY
All functions are depicted on the liquid crystal display (LCD) in 3 windows.
Full-segment display
Radio channels 1-5:
- current measurement of the selected channel (=radio probe)
- memory values min/max of the selected channel
- battery status of the sender displayed
Indoor thermometer :
- temperature of the display device (measures at the location where the device is used)
(1 2 3 4 5 1 etc)
- memory values min/max of the indoor thermometer
- battery status of the display device
2.2 KEYS / SWITCH / BATTERY COMPARTMENT
Rear view
°C/°F
- Changes the unit of temperature in the display from °C to °F or vice versa
MEMORY RESET
- Hold pressed for 3 seconds: Resets all memories (IN and CH1 ... CH5). The new recording
now begins depending on the setting of the MIN-MAX switch
CH
(=CHANNEL)
- Press briefly: changes to display of the next channel
- Hold pressed for 3 seconds. For the radio channel active on the display (CH1 .... CH5),
a sender search is started. The three waves above the CH flash during the search process.
Only the sender of the channel displayed is searched for; the others remain unaffected.
MIN-MAX
The MIN/MAX memory is managed and recorded depending on the setting. The setting applies
for all 6 channels
Pos. 1: PERM - From the last MEMORY RESET, the MIN/MAX recordings after the function
“drag indicator” are recorded. This recording is "PERMANENT", i.e. a new recording
does not start until after a new MEMORY reset.
Pos. 2: 24 Hr - If you choose this option, the MIN/MAX values for the last 24-28 hours in each
case are recorded. After expiry of this period, the MIN/MAX values that are older than
24-28 hours are removed from the memory. As soon as you have selected this option,
we recommend that you start the memory recording in a defined way with a
MEMORY RESET. This then starts a recording that triggers internally an elaborate
calculation and recording. The MIN/MAX values are administered here in blocks of four
hours.
Example: You want to be able to read the MIN/MAX values of the last 24-28 hours at all
times. Irrespective of when you look at the display, you will always see the extreme
values of the last 24-28 hours. Older recordings are deleted in the process.
Pos. 3: DAY- If you select this option, the MIN/MAX values are recorded for 24 hours in each
case. You are free to choose when the recording should begin. The start is determined
by a MEMORY RESET and after 24 hours, the memory is automatically reset and a new
recording begins. Example: You want to be able to read the MIN/MAX values of the last
24 hours in each case at 8 p.m. You therefore carry out a MEMORY RESET at 8 p.m.
With this RESET, the clock begins to tick internally and this automatically resets the
memory after 24 hours and starts a new recording.
Battery compartment
2 x 1.5 batteries of the size AM-4 resp. “AAA”
To open: slide lid in the direction of the arrow (indicated on the lid) after the stand has been
removed.
3. PUTTING INTO OPERATION
1. Put all radio sensors that you want to use into operation and place these in close proximity
(1-2 metres) to the reception device.
2. Open the battery compartment of the display device and remove all insulation strips. If no
batteries are in the device, insert the 2 batteries (UM-3 or ‘AA’ 1.5 V) in the correct polarity.
3. Now close the battery compartment.
4. Directly after the activation of the batteries, all segments are displayed for a few seconds on
the display. The JKT-3R then begins with the search of available sensors on all 5 channels.
5. As soon as the sensor is displayed correctly (see ‘Reception status’ in Chap., 4), you can set
up the sensor in the place where you want to effectively measure the outdoor temperature.
Under the most ideal conditions, this can be up to 30 m away. In reality, however, this is often
less. In the event of problems, try out other places, and do so both for the sensor and for the
display device. The radio sensor is weatherproof. Nevertheless, please place the sensor
where possible in the dry and at any rate in the shade.
6. If you would like to display further sensors on the reception device, you can purchase these
from shops. For outdoor use, we recommend weatherproof sensors. If you would like to
display other interior spaces, the sensor JKR-1 from the ‘Instruments by Jörg Kachelmann’
range is available in the same design as that of the display device and also has a large
display.
The unit is in searching mode.
Temperature readings are
securely registered.
No signals.
4. RADIO THERMOMETER
The operation of the radio sensor supplied with the device is easy:
- Open battery compartment
- Select channel
- Activate batteries (i.e. remove insulation strip) or insert batteries (please make sure that the
polarity is correct!)
- Close battery compartment again (please ensure that it is tightly closed!)
Other Irox radio sensors that are compatible with the JKT-3R:
3 channels (can be used on the channels, 1, 2 or 3) : HTS12C, HTS33, HTS13*, HTC13
5 channels (can be used on all 5 channels): HTS55, JKR-1
(*HTS13 is included in the scope of delivery of the JKT-3R and can be used on the
channels 1-3)
With the sensors with thermo and hygrometer, simply only the temperature is displayed on the
JKT-3R.
Reception status display
The wave symbol indicates the status of the signal reception of the channel displayed.
281
3029
3231
3433
1413
1615 2827
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Irox JKT-3R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Irox JKT-3R in de taal/talen: Engels, Italiaans als bijlage per email.

De handleiding is 0,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Irox JKT-3R

Irox JKT-3R Gebruiksaanwijzing - Deutsch, Français - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info