519204
5
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
5
TROUBLESHOOTING
If you experience any difficulties, please refer to the troubleshooting steps below as well
as those in the EZ Vinyl/Tape Converter manual included with this product.
I'm not hearing any audio when recording:
If you are recording to an iOS device:
o Make sure that iLP is powered on and that the needle is on the record.
o Connect iLP's RCA outputs to a stereo system or powered speakers. (Do not connect them to phono-level inputs;
iLP's RCA outputs are line-level and could damage a device with phono-level inputs.)
o Make sure iLP is not connected to your computer's USB port, then "power cycle" iLP (turn it off then on again).
If you are recording to a computer:
o Make sure that iLP is powered on and that the needle is on the record.
o Make iLP is selected as your computer's default recording device (see the instructions below).
o If you are listening through your computer's speakers, make sure those speakers are selected as your computer's
default playback device (see the instructions below). Alternatively, you could connect iLP's RCA outputs to a
stereo system or powered speakers. Do not connect them to phono-level inputs; iLP's RCA outputs are line-level
and could damage a device with phono-level inputs. (Note: The RCA outputs monitor the signal coming out of the
turntable, not the signal coming from your computer.)
o Make sure an iOS device is not connected to iLP's dock, then "power cycle" iLP (turn it off then on again). Also,
disconnect then reconnect the USB cable connecting iLP to your computer.
I'm not hearing any audio when playing music:
If you are playing music from vinyl:
o Make sure that iLP is powered on and that the needle is on the record.
o Connect iLP's RCA outputs to a stereo system or powered speakers. (Do not connect them to phono-level inputs;
iLP's RCA outputs are line-level and could damage a device with phono-level inputs.)
If you are playing music from your computer:
o Make sure your software music player's volume is turned up.
o Make sure your computer's volume is turned up.
o Make sure your computer's speakers are selected as your computer's default playback device (see the instructions
below). (iLP cannot be used as a playback device for your computer's audio.)
If you are playing music from an iOS device:
o Make sure your iOS device's volume is turned up. (When connected to iLP's dock, an iOS device will not play
audio out of iLP's RCA outputs or out of a connected computer.)
I am hearing a Hum through my speaker, laptop, or iOS device when using the turntable:
If you are recording to a laptop:
o Please connect the laptop to a grounded power supply (3 prong)
If you are playing through a speaker:
o Please connect to a grounded (3 prong) power supply.
If you are recording to iPhone or iPad:
o Use the USB cable to connect iLP to a computer that is plugged into grounded power supply, or use RCA cables
to connect iLP to a grounded receiver or speaker system.
SETTING YOUR COMPUTER'S SOUNDCARD AS THE DEFAULT PLAYBACK DEVICE
Windows XP: Click Start Menu Control Panel (or Settings Control Panel in Classic View) Sound and Audio
Devices. Click the Audio tab and under Sound playback, select your computer's soundcard as the default device.
Windows Vista: Click Start Menu Control Panel (or Settings Control Panel in Classic View) Hardware and
Sound Sound. Click the Playback tab and select your computer's soundcard as the default device.
Windows 7: Click Start Menu Control Panel Sound. Click the Playback tab and select your computer's
soundcard as the default device.
Mac: Click the upper-left "apple" icon then click System Preferences Sound. Click the Output tab. From the menu,
select Internal Speakers if you are using the computer's internal speakers or select Headphones if you are using
speakers or headphones attached to the computer's 1/8" headphone output.
SETTING iLP AS THE DEFAULT RECORDING DEVICE
Windows XP: Click Start Menu Control Panel (or Settings Control Panel in Classic View) Sound and Audio
Devices. Click the Audio tab and under Sound recording, select iLP as the default device.
Windows Vista: Click Start Menu Control Panel (or Settings Control Panel in Classic View) Hardware and
Sound Sound. Click the Recording tab and select iLP as the default device.
Windows 7: Click Start Menu Control Panel Sound. Click the Recording tab and select iLP as the default device.
Mac: Click the upper-left "apple" icon then click System Preferences Sound. Click the Input tab. From the menu,
select iLP as the device.
BEFORE RETURNING THE PRODUCT, please contact ION Audio or your retailer for technical support. Contact
information can be found in the Safety Instruction Booklet included with this product.
www.ionaudio.com/iLP
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ion ICADE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ion ICADE in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info