519178
4
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
4
DIAGRAM AND PARTS DESCRIPTION
1. Microphone Input with Volume Control (1/4"):
This mono input accepts a 1/4" input such as a
microphone, guitar, or other musical instrument.
2. Auxiliary input: This stereo 3,5mm (1/8”) input
can be used to connect a CD player, MP3 player,
or other audio source.
3. Bluetooth: The Paired LED will be lit when a
device is paired to EXPLORER BLUETOOTH.
This LED will not be lit when EXPLORER
BLUETOOTH is first powered on (unless it was
previously paired with a device). Press the
Disconnect button to disconnect a paired
Bluetooth device.
4. Master Volume Control: This adjusts the
speaker’s main mix volume, which includes the
Microphone Input, Auxiliary Input, Tuner, and the
audio of a paired Bluetooth device.
5. AM/FM Presets: Store a favorite radio station
and quickly tune to a preset radio station. There
are 6 numeric positions for AM stations and 6
numeric positions for FM stations. To add a
preset:
A. Select either the AM or FM band and then
use the Tuner buttons to select the desired radio station.
B. Press and hold a numeric preset button to assign the current station to that
preset number. To use an added preset, tap a preset number once lightly to
go to the stored radio station.
6. Radio Selector: This switch sets the tuner to AM or FM or turns the tuner off.
(Note: This switch does not turn the unit's power off – just the tuner.)
7. LCD: Displays the current radio station.
8. Tuner: Use these buttons to search for a radio station. To "seek" (jump to the
next available station), hold this down for a few seconds until it starts to seek a
station. The unit will remember the last station you were on and start at that
station when you power off and power on again.
9. Power LED: Indicates whether EXPLORER BLUETOOTH is on or off.
10. USB Charge: Connect your device’s charge cable here to charge it. USB
charging only functions when the unit’s power is turned on.
Note: Users with iPad (3
rd
generation or higher) may
experience slower charging. We recommend charging with
the screen locked when using iPad (3
rd
generation or higher).
11. Device Cradle: Place your iPad/iPod touch®/iPhone®,
Android® or other device here to be held. These can be
connected via Bluetooth or to the aux input using the included
3,5mm (1/8”) to 3,5mm (1/8”) cable.
Note: It is recommended to remove your iPad or other device
from the cradle before transporting or traveling with
EXPLORER.
12. Antenna: Adjust this FM antenna to get the best radio
reception.
Note: To prevent accidental damage, we recommend rotating
the antenna only when it is positioned horizontally. Also,
retract the antenna when the Tuner is not in use. Note: When using AM radio if you have a Bluetooth device that is
paired, this will cause poor AM reception. Unpair your Bluetooth device in order to listen to AM radio.
13. Power Cable Input (IEC): Insert the included power cable here to charge the unit. Note that the EXPLORER
BLUETOOTH can run off the power adapter while it simultaneously charges the battery. The charge indicator illuminates
when the battery is charging.
14. Voltage Selector*: If your unit has a voltage selector switch, change its setting only when necessary (e.g., when
traveling to a country or region with a different voltage), and replace the fuse with one with an appropriate rating (printed
under the unit’s power cable input, next to the desired voltage). Selecting an improper voltage setting or using a fuse
with an incorrect rating can damage the unit and/or fuse. If the voltage selector is covered, only remove *one* screw of
the cover and slide it aside to expose the selector.
15. Fuse Cover: If the unit’s fuse is broken or if you are changing the setting of the voltage selector switch, use a
screwdriver or other tool to lift this tab to replace the fuse. Replace it with a fuse with an appropriate rating (printed under
the unit’s power cable input, next to the desired voltage). Using a fuse with an incorrect rating can damage the unit
and/or fuse.
16. Power ON/OFF Switch: Turns EXPLORER BLUETOOTH on or off. Please note that while EXPLORER BLUETOOTH is
connected to a power source, it does not need to be powered on to charge the battery.
17. Battery Level Indicator: While the unit is powered ON and unit is not plugged in, these four lights indicate the power left
in the battery. Battery life varies based on volume and usage.
18. Charging LED: This illuminates when the unit is attached to wall power and is in the process of charging.
*WARNING: If your unit has a voltage selector
switch, change its setting only when necessary
(e.g., when traveling to a country or region with a
different voltage), and replace the fuse with one
with an appropriate rating (printed under the unit’s
power cable input, next to the desired voltage).
Selecting an improper voltage setting or using a
fuse with an incorrect rating can damage the unit
and/or fuse. If the voltage selector is covered,
only remove *one* screw of the cover and slide it
aside to expose the selector.
Android is a trademark of Google Inc.
iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
1
2
3
4
5
6
7
8
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ion EXPLORER BLUETOOTH bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ion EXPLORER BLUETOOTH in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info