509864
14
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
En
13
Decoder version:• show Decoder version
FPGA version:
• show FPGA version
TS/IP IN (or OUT) NIOS:• it’s changed when TS/IP board is set to “IP Out” or “IP IN”.
TS/IP IN (or OUT) FPGA: • it’s changed when TS/IP board is set to “IP Out” or “IP IN”.
5.3.5 Factory Setting
All the user congurable parameters will be set to the factory default settings, including IP address and the unit
name.
5.3.6 Optional Function
There are two submenus:
1. External Board Type: Press <ENTER>-key to active the menu, use <UP> <DOWN> keys to congure the
TS/IP functional block as ‘IP In or ‘IP Out’ or ‘No Exist’, and the option is exclusive. Press <ENTER> key to
conrm or to scrap by pressing <EXIT> key.
After the operation, you need reboot the unit to valid the conguration.
IP In: the TS/IP port is congured as input, you can feed transport stream over IP into the unit.
The menu ‘Ethernet’ will be showed under the inputs menu.
IP Out: the TS/IP port is congured as output, you can set the transport stream over IP output to the IP network.
The menu ‘Ethernet’ will be showed under the outputs menu.
No Exist: the TS/IP port is invalid. Therefore the menu ‘Ethernet’ will not be showed anywhere.
2. Mux Function: Press <ENTER> key to active the menu, use <UP> <DOWN> keys to congure the Mux
functional block as ‘Enable’ or or ‘Disable’. Press <ENTER> key to conrm or to scrap by pressing <EXIT> key.
5.3.7 Machine Type
This setting is reserved for factory-setting, and you are not allowed to access this menu.
6. FAQ
1. Why is there nothing in the LCD?
Answer: Please check whether the power supply is connected well rst. If not, insert it well and turn on the
device. If there is still nothing displayed on the LCD, then the unit may be damaged, please contact the agent for
technical support.
2. Why can the DVB-S2 signal not be locked?
Answer: Please ensure whether the input cable in connected well rst. If not, insert it well. If it is connected well,
please check whether all the necessary parameters are set properly. If not, please set the parameters properly.
If the signal still cannot be locked, please check whether the quality of the signal is out of the threshold of the
Tuner. If not, then the device might be damaged, please contact the agent for support.
3. Why can the ASI not be locked?
Answer: Please make sure the BNC cable is connected well and there are programs transmitted to the unit via
the BNC cable.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Inverto IDLV-5000P bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Inverto IDLV-5000P in de taal/talen: Engels als bijlage per email.

De handleiding is 0,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info