54538
31
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
• Remove
the battery
compartment
cover (left side
of the unit).
• Insert two 1,5
V AAA batteries
(Alkaline Type LR 03). Make absolutely sure that you insert
the batteries with the correct polarity as marked. Do not
use rechargeable batteries.
• Replace the battery cover carefully.
If the change battery icon is displayed, measurement is
no longer possible and you must replace all the batteries.
Note: Batteries containing pollutant substances are marked
as follows: Pb = Battery contains lead, Cd = Battery contains
cadmium, Hg = Battery contains mercury.
It is vital to set date and time. Only this way is it possible to
save and subsequently retrieve your measured values with
the right date and time. Time is shown in 24 hour format.
Note: if you hold down the buttons “down” or “up”,
you can set the values more quickly.
• Press “MODE”. The month starts ashing. Using the buttons
“down” or “up”, set the month 1 to 12 and conrm
with “MODE”.
• Set the day, hour and minute and conrm in each case with
“MODE”.
Setting individual warning limits (Doctor’s function)
After conrming date and time, the warning limits for
systolic and diastolic for each individual user can be set
individually. With the adjustment possibility, medical
instructions in the case of outpatient blood pressure
monitoring can be ideally implemented - Doctor’s function.
Note: the factory-set values are based on WHO guidelines for
high-normal and amount to 130 mmHg (systolic) and 85
mmHg (diastolic) (entry limit range). See the WHO-chart
shown. You must conrm the factory setting in order to
activate the Doctor’s function.
• Setting warning limits always begins with User 1.
• Unless the factory setting has been changed, the display
will read ‘--’.
• You can now alter the limits for systolic pressure with the
buttons “down” and “up” in 5 mmHg stages.
• Conrm the required value with the “MODE” button.
• You can now also change the limits for diastolic pressure
with the buttons “down” and “up” in 5 mmHg
stages.
• With the “MODE” button, save the settings and switch to
the next user memory, you can also save the settings with
“START/STOP” but then you go into measurement mode. If
you do not press any button, the instrument automatically
switches off after one minute.
Note
• From a medical point of view, the distance between
systolic and diastolic should be greater than 30 mmHg. A
systolic limit value below 100 mmHg and a diastolic limit
below 60 mmHg is not recommended.
According to WHO Guidelines/Denitions and the latest
ndings, the test results can be classied and evaluated
according to the following chart.
4 | INSERTING/ CHANGING BATTERIES
5 | SETTING DATE, TIME & WARNING LIMITS
31
31

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Inventum-BC18

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Inventum BC18 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Inventum BC18 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info