522375
33
Verklein
Vergroot
Pagina terug
1/35
Pagina verder
35
User Manual
6.7 What should I do if the auto modes fail?
Failure of auto modes can happen for various reasons. Hereafter you can find a
range of possibilities.
6.8 Auto-range fails in very shallow waters displaying a
digital depth readout deeper than the actual value. What
should I do?
This usually happens if the STC is set to LONG or MID and the bottom is shallow
or SHORT if the bottom is very shallow causing the auto-range to hook to the
second or third echo from the bottom (since in shallow waters the sound bounces
more times back and forth the surface to the bottom). Try decreasing the STC
value to SHORT in shallow waters or to switch it to VERY SHORT or OFF.
6.9 Auto range fails, and the digital depth readout displays
a very shallow reading. What should I do?
This usually happens if the STC is off or is set to a low value causing disturbs from
surface clutter to be stronger than bottom echoes. Try increasing the STC value.
As general rule STC has to be set as in shallow waters and LONG in depth waters.
6.10 Auto-range fails in very deep waters displaying a digital
very shallow depth readout. What should I do?
The Fish Finder capability to detect the bottom decreases as the bottom depth
increase. If the bottom composition is soft as mud, if the sea conditions are bad,
if there are thermoclines or the water is full of materials in suspension it can
further decrease thus causing the digital depth readout to fail. When this happens
the auto-range algorithm also fails. To recover from this situation it is necessary
to switch to manual range mode and to set the manual depth mode. When manual
depth mode is selected the algorithm that calculates the digital depth readout
searches for the bottom within the range manually selected by the user. At this
point it is necessary to increase manually the range until the bottom becomes
graphically visible. If the echoes from the bottom are strong enough, the Fish
Finder shall look to the bottom giving a correct depth reading and shall be pos-
sible to return in auto range mode. Please note that if one or more of the condi-
tions that reduce the echoes from the bottom listed above is true the bottom may
be not visible at all, in this situation a strong thermocline or surface clutter may
be interpreted by the Fish Finder as the bottom.
6.11 At a very shallow range upper half of the screen appears
almost completely filled by the surface clutter. How can
I eliminate it?
This is normal in shallow waters. To clean up the surface clutter without degrading
the digital depth readout algorithm functionality there are two modes: 1) if Sur-
face Declutter = OFF, it is possible to set the STC value to custom setting the STC
length to the same size of the surface clutter, and increasing the STC strength
until the image on the screen cleans up. Please note that in very shallow waters
it is usually better to switch to manual gain mode to reduce gain fluctuation due to
rapidly changing bottom conditions. 2) Using Surface Declutter, increase the SD
value until the surface declutter disappears completely.
www.busse-yachtshop.de | info@busse-yachtshop.de
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Interphase 50-200 FISH FINDER bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Interphase 50-200 FISH FINDER in de taal/talen: Engels als bijlage per email.

De handleiding is 1,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info