647632
2
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
BASIC OPERATION - USER MODE
When radio is turned ON, it always sets in the USER MODE. In this mode, user can only operate the following basic functions, in
order to avoid entering any wrong command or change the radio settings and programming.
Power ON/OFF
1. Switch ON the radio by pressing and holding the ON-OFF (8) key for about 2 seconds.
2. The LCD Display (9) will shortly show the Channel Number (A) and the CTCSS Code Number (B).
3. Then the LCD Display (9) will show the selected Volume Level (A) (from level 01 to 08), the Battery Level (G) and the Keypad
Lock icon (E).
4. To switch OFF the radio, press and hold the ON-OFF (8) key for about 2 seconds.
Volume Level Setting
Adjust the Volume to the desired level, pressing the UP (3) or DOWN (4) keys while listening to an incoming communication.
The desired Volume Level (A) will appear on the LCD Display (9).
Monitor Function
Press and hold the MENU/MONITOR key (7) for about 2 seconds to activate the Monitor function. This function opens temporarily
the Squelch in order to listen to the background noise and to any weak signal. This function is convenient to monitor any incoming
communication on the operating channel. If the Monitor function is enabled, the BUSY Icon (C) appears on the LCD Display (9). To
disable the Monitor function, release the MENU/MONITOR key (7).
Earset Operation
1. Connect the external earset to the earset jack (1).
2. Adjust the Volume to the desired level.
3. The built-in speaker (5) is disabled when the earset is connected.
Always set the volume to the minimum level before connecting an external earset, in order to avoid damaging the earset or the
user’s ear. Gradually increase the volume level while wearing the earset and listening to an incoming signal.
CALL Function / CALL Memory
The Pager can receive and store in memory an incoming CALL signal, if this CALL signal was transmitted by a
transmitter/transceiver type DRS-5070 (desk type station) or SL-02 (handheld station).
When a CALL signal is received, a CALL tone is heard and the CALL icon (F) blinks on the LCD (9). The CALL icon (F) will
continue to blink in order to inform the user that a CALL signal was received by its pager and it will stop blinking when the
MENU/Monitor key (7) will be pressed.
ADVANCED FUNCTIONS - PROGRAM MODE
Pager may be programmed by the system manager in the PROGRAM MODE. The following functions are programmable only in
the PROGRAM MODE. In the normal USER MODE, the user cannot access, program or modify any of these functions, in order to
avoid entering any wrong command or change the settings programmed by the system manager.
1. Channel selection (PMR channels P1-P8) (LPD channels 01-69)
2. CTCSS Code selection (from 0 to 38)
3. VIBRATION Alert
To enter the PROGRAM MODE, proceed as follows :
1. Switch OFF the radio.
2. Switch ON the radio by pressing simultaneously the ON-OFF (8) and the MENU/MONITOR (7) keys, until radio is ON.
3. The Keypad LOCK icon (E) will disappear from the LCD (9).
4. Press the MENU/Monitor (7) key several times to scroll the various programmable functions.
Switch OFF the radio to exit the PROGRAM MODE.
Channel Selection
1. In the PROGRAM MODE press the MENU/Monitor Key (7) until the Channel Number (A) blinks on the LCD (9).
2. Press the UP (3) or DOWN (4) keys to select the desired channel number (PMR channels P1-P8) (LPD channels 01-69).
Press and hold the UP (3) or DOWN (4) key, to advance the channel selection quicker.
3. To confirm and store the selection, press the ON-OFF (8) key or press the MENU/Monitor (7) key to move to the next function.
LPD Channels Table PMR Channels Table
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Intek RP-600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Intek RP-600 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info