609974
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Turn Area/s ON or OFF.
Once you have Logged on to a Terminal, and see the Area status with the “Push
Off” or “Push On” message, you may perform the ON or OFF operations.
At the prompt, turn the displayed Area (or Area List)
OFF or ON by pressing the appropriate key.
Remember: You have a limited time to turn an Area
OFF once you have entered, and a limited time to
exit when you have turned an Area ON.
If you are allowed to control multiple Areas:
-DISPLAY MODE. The Display mode can be
changed from Single Area to Area List and vice
versa, by pressing the Right Arrow key.
-AREA SELECTION. You may select other Areas or
Area Lists by using the Up and Down Arrow keys or
the letter key that the Area name begins with.
After pressing the ON key, the display may show a
message like this. It means that the item displayed
is either faulty or in an alarm state, and the Area will
not turn ON.
Try and rectify the problem before trying again.
If this is not possible, You may be allowed to
ISOLATE the item while the “Zone Problem”
message is displayed, by pressing the OK key.
Access (Un-lock) a Door.
Terminals may be programmed to momentarily Unlock a Door to allow access.
  
  
 



Logon to the Terminal as described earlier.
(PIN + OK) Area Status will display as before.
Press OK a second time to perform the Door
Access operation. (Not necessary for
Terminals/Users designated as “Access Only”)
The display will verify that the operation was
successful, or provide a message showing why
the operation could not be performed.
  
  
 



Acknowledge an Alarm.
Alarm messages must be acknowledged by a User with the appropriate authority.
These messages provide precise information of the type of alarm, the Area it has
occured in, and the Zone or System Input that generated the alarm.
An Alarm message may be displayed on the
Terminal, and indicates which Area the Alarm
has occured in.
Logon to the Terminal as described before.
(PIN code + OK)
The display will show the specific details of the
Alarm and provide a scrolling message if more
than 16 characters.
e.g. “Had Alarm on FRONT DOOR in FOYER”
Note alarm details, then press the OK key to
acknowledge the message. The display will
now show the Area ON / OFF message to allow
you to continue with your operation.
e.g. Turn the Area OFF.






 
 
 



LOGOFF the Terminal.
When you have completed your operations, you must Logoff the Terminal.
Press the END key. (END also lets you start
again, if you make an error entering your PIN)
or
- - - ,
- - - ,
NOTE: Quick Arm/Disarm. Your system may be configured to allow a nominated
Area to be controlled simply by entering your PIN code, then the OFF or ON key.
i.e. OK key not required. (V7.8 or later only with LCD Terminal V8.3 or later)
LOGON to an LCD Terminal.
Logging on is the first step performed in most operations.
  
  
 
  
  
 






- - - ,
Enter your secret PIN code using the digit keys,
then press the OK key.
If there are no messages to be acknowledged, the
Display will first greet and identify you.
(Note: Greeting option can be disabled if required)
The status of the first Area (or Area List) that you
are allowed to control is displayed, with a prompt to
perform an ON or OFF operation.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Inner Range Concept C4000 Controller bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Inner Range Concept C4000 Controller in de taal/talen: Engels als bijlage per email.

De handleiding is 0,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info