667961
4
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
Setup the System
Tips: To protect your privacy, please set your password at earliest convenience. Right click the mouse - Go to System
Setup - System Admin - User Management to set password.
This system is standalone with embedded Linux Operating System in the NVR. Just like a desktop PC,
you need to hook a screen to the NVR to enter the OS. Any TV, monitor with VGA or HDMI input should
work for it.
Steps to setup the system
Install antennas for cameras and the NVR
Connect a screen to the NVR via its HDMI or VGA port (HDMI and VGA cable not included).
Plug the NVR to power (use bigger12V 2A power adapter).
See FAQ1 if you don't get any display on the screen.
Plug cameras to power (use smaller12V 1A power adapters).
Within seconds, you should see cameras’ images on the screen.
Plug the mouse (included) to an USB port on back of NVR. You shall then be able to operate on
the system.
In the OS you can find fullest functionalities including live view, record, playback, video backup and all
settings.
1
2
3
4
5
6
7
Record video
Record video
Record videos is very easy on Homeguard camera system.
Timing Record, set time periods you want the NVR to record. Click right button System Setup
Record Setup Record Plan; here you can setup periods you want the NVR to record.
Everyday 0:00:00-23:59:59 means 24×7 recording. The system records 24×7 by default when it
detects hard disk.
Manual Record, the shortcut to turn on record. Click right button Manual Record; you can turn
ON or turn OFF the record of certain channels. Red dot on right above corner means manual
record is ON.
Motion Record. Motion Record means certain channel(s) will be recorded only when movement is
detected. Click right button System Setup Record Setup Record Plan; by unselecting
Time and selecting Motion, the channel will record only when motion detected.
The system may not include hard disk depending on the kit you selected. The NVR works with most
3.5” SATA HDD.
Steps to install a hard drive (if your system has preinstalled HDD, please skip this step)
1
2
Unplug your NVR from power, unscrew and remove the
top cover.
Connect the SATA power and data cables from the NVR
to the corresponding ports on your HDD(as shown).
Place the HDD into the NVR. Any cable should cross up
over the HDD.
Holding the hard drive and the NVR, gently turn it over and
line up the holes on the hard drive with the holes on the
NVR. Using a Phillips screwdriver, screw the provided
screws into the holes. Assemble the cover.
Default ID: admin Password: 123456
CH1
CH3
CH2
CH4
A
C
B
D
5 6
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Iget HGNVK-48904 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Iget HGNVK-48904 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info