DD
When the [RIT] control is assigned as
SUB tuning dial
q Push [RIT] for 1 sec.
•“RIT” indicator flashes when the SUB tuning dial func-
tion is activated.
w Rotate [RIT] control for the desired tuning direction
and speed.
• Tuning speed can be adjusted in ±5 steps.
e Set [RIT] control to the center position to stops tun-
ing.
• A beep tone sounds when [RIT] control is set to the cen-
ter.
r Push [RIT] to cancel the SUB tuning dial function.
24
4
BASIC OPERATION
■ SUB band OFF
The SUB band indication can be deactivated to sim-
plify operation.
➥ Push [SUB•SUB OFF] for 1 sec. to turn the SUB
band indication ON and OFF.
• Push [M/S•BAND] for 1 sec. to change the operating
band. (p. 20)
■ SUB tuning dial
The IC-910H has a large main tuning dial for frequency
setting. In addition, the [RIT] or [SHIFT] controls can
be used as a SUB tuning dial for dual band simultane-
ous tuning, etc. The SUB tuning dial changes the op-
erating frequency continuously at a variable speed.
To use the SUB tuning dial function, assign the func-
tion to either the [RIT] or [SHIFT] control using the
RIT/SHIFT set mode.
The assigned control can be used for its original
function, however, both functions cannot be used si-
multaneously.
