670161
72
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
13
CONNECTOR INFORMATION
13-2
ACC sockets
Connects to external equipment or a PC to control an external unit or the transceiver.
ACC sockets
*
2
You can change the MOD input level.
L100 mV rms is at 50% as the default.
MENU
»
SET > Connectors > ACC MOD Level
*
3
You can change the AF/IF
(IF=12 kHz)
settings to output a
12 kHz IF signal. In that case, you can listen to the DRM
broadcast with the application software receiver that is
installed onto your PC.
MENU
»
SET > Connectors > ACC Output Select
MENU
»
SET > Connectors > USB Output Select
MENU
»
SET > Connectors > LAN Output Select
*
4
You can change the AF/IF
(IF=12 kHz) output level
.
L Approximately 200 mV rms is at the 50% as the
default.
MENU
»
SET > Connectors > ACC IF Output Level
MENU
»
SET > Connectors > USB IF Output Level
*
1
When the SEND terminal controls an inductive load, such
as a relay, a counter-electromotive force can malfunction
or damage the transceiver. To prevent this, we recommend
adding a switching diode, such as an 1SS133, on the load
side of the circuit to absorb the counter-electromotive force.
When the diode is added, a delay in relay switching may
occur. Be sure to check its switching action before operating.
(Example) ACC 1/2 socket
To a non-Icom
linear amplier
Relay
Switching diode
e SEND
u 13.8 V
ACC 1
PIN
No.
NAME DESCRIPTION SPECIFICATIONS
1 RTTY Controls RTTY keying.
High level:
Low level:
Output current:
More than 2.4 V
Less than 0.6 V
Less than 2 mA
2 GND Connects to ground. Connected in parallel with ACC 2 pin 2.
3 SEND*
1
Input/output
pin.
Connected in
parallel with
ACC 2 pin 3.
An external unit controls
the transceiver.
When this pin goes to
ground, the transceiver
transmits.
Input voltage (RX):
Input voltage (TX):
Current ow:
2.0 ~ 20.0 V
–0.5 ~ +0.8 V
Maximum 20 mA
The pin goes low when
the transceiver transmits.
Output voltage (TX):
Current ow:
Less than 0.1 V
Maximum 200 mA
4 MOD
Modulator input.
Connects to the internal modulator circuit.
Input impedance:
Output level:
10 kΩ
Approx. 100 mV rms*
2
5
AF/IF
(IF=12 kHz)*
3
Fixed AF detector or receive IF (12 kHz)
signal output.
Output impedance:
Output level:
4.7 kΩ
100 ~ 300 mV rms
*
4
6 SQL S
Squelch output.
Grounded when the squelch opens.
SQL open:
SQL closed:
Less than 0.3 V/5 mA
More than 6.0 V/100 μA
7 13.8 V
13.8 V output when power is ON.
Connected in parallel with ACC 2 pin 7.
Output current: Maximum 1A
8 ALC
ALC voltage input.
Connected in parallel with ACC 2 pin 5.
Input level:
Input impedance:
–4 ~ 0 V
More than 10 kΩ
8-pin
Rear panel view
1
2
3
4
5
6
7
8
ACC 2
PIN
No.
NAME DESCRIPTION SPECIFICATIONS
1 8 V Regulated 8 V output.
Output voltage:
Output current:
8 V ±0.3 V
Less than 10 mA
2 GND Connects to ground (Same as ACC 1 pin 2).
3 SEND*
1
Same as ACC 1 pin 3.
4 BAND
Band voltage output.
(Varies with the selected amateur band)
Output voltage: 0 ~ 8.0 V
5 ALC Same as ACC 1 pin 8.
6 TRV
Activates [X-VERTER] input/output when
“HIGH” voltage is applied.
Input impedance:
Input voltage:
More than 10 kΩ
2 ~ 13.8 V
7 13.8 V Same as ACC 1 pin 7.
1
2
3
4
5
6
7
7-pin
Rear panel view
72

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Icom IC-7610 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Icom IC-7610 in de taal/talen: Engels als bijlage per email.

De handleiding is 16,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info