123
13
SET MODE
■
Quick set mode (continued)
TTwwiinn PPeeaakk FFiilltteerr
(RTTY mode)
This item turns the twin peak filter ON and OFF.
OONN
Twin peak filter is ON
OOFFFF
Twin peak filter is OFF.
(default)
RRTTTTYY MMaarrkk FFrreeqquueennccyy
(RTTY mode)
This item selects the RTTY mark frequency. RTTY
mark frequency is switched between 1275, 1615 and
2125 Hz.
22112255
2125 Hz RTTY mark
frequency (default)
11227755
1275 Hz RTTY mark
frequency
RRTTTTYY SShhiifftt WWiiddtthh
(RTTY mode)
This item adjusts the RTTY shift width. There are 3
selectable values: 170, 200 and 425 Hz.
117700
170 Hz RTTY shift
frequency (default)
442255
425 Hz RTTY shift
frequency
RRTTTTYY KKeeyyiinngg PPoollaarriittyy
(RTTY mode)
This item selects the RTTY keying polarity. Normal or
reverse keying polarity can be selected.
When reverse polarity is selected, Mark and Space
are reversed.
- Normal : Key open/close = Mark/Space
- Reverse : Key open/close = Space/Mark
NNoorrmmaall
Normal polarity
(default)
RReevveerrssee
Reverse polarity
SSiiddee TToonnee LLeevveell LLiimmiitt
(CW mode)
This item allows you to set a maximum volume level
for CW side tones. CW side tones are linked to the
[AF] control until a specified volume level is reached
—further rotation of the [AF] control will not increase
the volume of the CW side tones.
OONN
CW side tone level is limited
with [AF] (default)
OOFFFF
CW side tone level is linked
to [AF]
SSiiddee TToonnee LLeevveell
(CW mode)
This item adjusts the CW side tone level from 0% to
100% in 1% steps.
See p. 43 for details.