5
Instruction manual
Play/pause mode
• Press PLAY/PAUSE/USB button on the
unit or USB button on the RC to start
playback, the display will show the current
track number and PLAY symbol.
• Press PLAY/PAUSE/USB button on the
unit or USB button on the RC to pause
at any track when playing, PLAY symbol on
the display flashes. Press this button again to
resume playback.
• To stop playback, press STOP button. The
display will show the total number of tracks on
the disc.
Skip and search mode
• Press NEXT button on the unit or
button on the RC once to skip to the next track.
Press and hold this button to search for a
particular point at high speed forward. Release
the button to resume normal playback.
• Press BACK button on the unit or
button on the RC to skip back to previous
track. Press and hold this button to search
for a particular point at high speed backward.
Release the button to resume normal playback.
• If the disc contains more than 10 tracks,
you can skip to 10 tracks forward or back by
pressing +10/FOL+ or -10/FOL- buttons on the
RC correspondingly.
• If you use an MP3 disc containing folders,
you can select a folder. In stop mode, press
and hold repeatedly +10/FOL+ or -10/FOL-
button on the RC. The number of the current
folder will be displayed. After you selected
a folder you can select tracks in the current
folder as described above. While playback, the
track number and folder number will be shown
every few seconds alternatively.
Repeat/Random mode
• Press once REP/RAN button on the unit or
REPEAT/RANDOM button on the RC for single
track repeat playing. REP will be displayed.
• Press this button again for all track repeat
playing. REP ALL will be displayed.
• If you use an MP3 disc containing folders,
press this button again to repeat all tracks in the
current folder. REP ALBUM will be displayed.
• Press this button again for all track
random playing. RANDOM will be displayed.
• To cancel repeat or random playback,
press again REP/RAN button on the unit or
REPEAT/RANDOM button on the RC.
Program mode
Up to 99 tracks can be programmed for disc
play in any order or the same track can be
repeated up to 99 times.
• Before use, be sure to stop the disc by
pressing STOP button.
• Press PROGRAM button. The display will
show “P01” and “PROGRAM”. This indicates
that the set is now in memory programming
mode, at the first memory position.
• If you use an MP3 disc, press and hold
repeatedly +10/FOL+ or -10/FOL- button on
the RC to select a folder.
• Select a desired track by using BACK /
NEXT buttons on the unit or /
buttons on the RC.
• Press PROGRAM button again to confirm.
The set will advance to next memory position,
the display will show “P02”. Repeat two steps
described above to enter additional memories
into the program if necessary.
• After the maximum of 99 tracks (or less)
have been selected as described above, press
PLAY/PAUSE/USB button on the unit or
USB button on the RC to start playing the
programmed tracks.
• The “PROGRAM” symbol will remain on
to indicate that you have saved a program-
memory (sequence).
• To check the program you stored, after the
programming is completed, in stop mode press
PROGRAM button, then press repeatedly
NEXT button on the unit or button on the
RC to see all programmed track numbers.
• The program memory will be cleared when
you press STOP button twice, open the disc
compartment door or turn off the disc player or
power supply.
Good quality sound is guaranteed only
when playing licensed MP3 discs.
