675860
5
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
HYUNDAI
8 9
ENGLISH
Positioning and removing a drill or screw bit
(fig. A)
This tool is equipped with a keyless chuck (5).
Open the chuck by turning the collar (6).
Insert the drill or screw bit in the chuck.
Close the chuck by firmly tightening the collar
(6) while holding the rear part of the chuck with
the other hand.
In order to remove the drill or screw bit
proceed in reverse order.
Before positioning or removing a drill or
screw bit always remove the battery
from the machine.
Forward/reverse switch (fig. A)
Push the forward/reverse switch (2) to the left
to drill holes and fasten screws.
Push the forward/reverse switch (2) to the right
to loosen screws.
Always wait until the motor has come
to a complete standstill before
changing the direction of rotation.
Adjusting the torque (fig. A)
This machine has been fitted with an adjustable
coupling to limit the torque when tightening
screws.
Turn the adjustment collar (4) clockwise to
reduce the torque and counterclockwise to
increase the torque. The correct setting
depends on the type and size of the screw and
the work piece.
In case of doubt, start with the lowest setting
and increase the torque until you have
reached the desired result.
For drilling, turn the adjustment collar to the
drilling symbol.
Switching on and off (fig. A)
To switch on the machine, press the on/off
switch (1).
To switch off the machine, release the on/off
switch.
CLEANING AND MAINTENANCE
The machine does not require any special
maintenance.
Regularly clean the ventilation slots.
ELECTRICAL SAFETY
Always check that the battery power
corresponds to the voltage on the
rating plate. Also make sure that the
voltage of your charger corresponds to
that of your mains.
DESCRIPTION (FIG. A)
Your rechargeable drill/screwdriver has been
designed for drilling in wood, metal, stone and
plastics and for screwdriving applications.
1. On/off switch
2. Forward/reverse switch
3. LED light
4. Torque adjustment collar
5. Chuck
6. Collar
7. Battery
8. Battery release button
Charging the battery
The battery (7) must be charged before first use.
Only after several charge and discharge cycles
the battery will attain full capacity.
Connect the power adapter (9) to the battery.
Plug the power adapter into the power outlet.
Charge the battery for 3-5 hours.
The red charging indicator lights when the battery
is being charged.
The green charging indicator lights when the
battery has been fully charged.
Never charge the battery for more than
5 hours. If the red indicator does not
light, the battery may be too warm. In
this case let the battery cool down
before charging.
To install the battery (fig. B)
Slide the battery into the base of the drill until it
clicks into place.
To remove the battery (fig. C)
Press the battery release button (8) and slide the
battery from the base of the drill.
LED light (3)
Your drill/screwdriver is equipped with a LED light.
The LED light will light when you operate the
machine, providing the work area to be lighted.
Only use the charger in a dry environment at a
temperature between 10 °C and 40 °C.
Do not use the charger when it has been
damaged.
Only have the charger and battery repaired by
an authorized repair agent.
Prevent the battery from short circuiting. Make
sure that the battery connections cannot touch
metal objects.
Do not store the battery where the temperature
may rise above 40 °C, e.g. in a car which has
been parked in the sun.
Do not burn the battery.
Never attempt to open the battery.
In case of skin contact of the battery fluid,
flush immediately with abundant water.
Neutralize with a mild acid such as lemon juice
or vinegar. In case of eye contact, rinse
abundantly for 10 minutes with clean water
and consult a physician.
Pictograms on charger and battery
The following pictograms have been applied to
the charger:
Indoor use only.
Double insulated.
SFail-safe isolating transformer.
Cut-out switch.
Read this manual carefully before
using the machine.
The following pictograms have been applied to
the battery:
Do not incinerate battery.
Do not expose charger and battery to
temperatures above 40 °C.
Do not expose charger and battery to
water.
Do not dispose of the battery in
unsuitable containers.
RECHARGEABLE DRILL/
SCREWDRIVER
56112
WARNING
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious
injury.Save all warnings and
instructions for future reference.
SAFETY WARNINGS
When using the machine, always observe the
enclosed safety warnings as well as the additional
safety warnings.
The following symbols are used throughout this
manual:
Denotes risk of personal injury or
damage to the machine.
ADDITIONAL SAFETY INSTRUCTIONS FOR
RECHARGEABLE MACHINES
Remove the battery from the machine during
maintenance and when the machine will not
be used for a longer period of time.
Only use the prescribed type of battery (see
the technical data).
WARNING! This device produces an
electromagnetic field during operation.
This field may interfere in certain
circumstances with active or passive
medical implants. To reduce the risk of
serious or fatal injury, we recommend
that persons with medical implants
consult their physician and the medical
implant manufacturer before using this
device.
SAFETY INSTRUCTIONS FOR CHARGER AND
BATTERY
Read the general instructions and safety
instructions carefully before charging the
battery.
Only use the prescribed charger to charge the
battery. Do not charge batteries of another
type with this charger. Mains adaptors are only
to be used together with the charger socket
and the accompanying battery.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hyundai 56112 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hyundai 56112 in de taal/talen: Nederlands, Duits, Engels, Frans, Pools als bijlage per email.

De handleiding is 0,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info