675850
4
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
HYUNDAI
6 7
ENGLISH
NOISE AND VIBRATION
Typically the A-weighted sound pressure level of
the machine is 91.4 dB(A). Uncertainty K = 3.0
dB(A).
The noise level when working can exceed 102.4
dB(A).
Wear hearing protection!
Vibration emission value a
h,D
= 15.05 m/s
2
Uncertainty K = 1.5 m/s
2
.
GUARANTEE
Refer to the enclosed guarantee conditions for the
terms and conditions of guarantee.
ENVIRONMENT
Disposal
Your product, accessories and packaging should
be sorted for environmental-friendly recycling.
Do not dispose of power tools into domestic
waste. According to the European Guideline
2002/96/EC for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
Subject to change; specifications can be changed
without further notice.
Changing the direction of rotation (fig. A)
Press the forward/reverse switch (4) to the left
to drill or to fasten screws.
Press the forward/reverse switch (4) to the
right to loosen screws.
Set the forward/reverse switch (4) to the
middle position to lock the machine.
Always wait until the motor has come
to a complete standstill before
changing the direction of rotation.
Adjusting the speed (fig. A)
This machine has been tted with an adjusting
wheel (2) for the maximum speed.
Turn the adjusting wheel (2) as indicated on
switch (1) to set the maximum speed.
Switching on and off (fig. A)
To switch the machine on, press the on/off
switch (1). The further you press the switch,
the higher the speed of the machine.
To switch off the machine, release the on/off
switch (1).
To switch the machine to continuous mode,
keep the on/off switch (1) pressed and at the
same time press the lock-on button (3).
Subsequently release the on/off switch.
To switch off continuous mode, press the on/
off switch (1) again.
CLEANING AND MAINTENANCE
The machine does not require any special main-
tenance.
Regularly clean the ventilation slots.
TECHNICAL DATA 56020
Mains voltage V 230-240
Mains frequency Hz 50
Power input W 710
No load speed min
-1
0-2,900
Impact (no load min
-1
0-48,000
Drilling capacity in
steel mm 13
wood mm 25
concrete mm 13
Chuck mm 13
Weight kg 1.77
Depth stop
Chuck key
Instruction manual
Safety warnings
Guarantee and service
Inserting and removing a drill or screw bit (fig.
A)
Open the chuck (7).
Insert the drill or the screw bit in the chuck.
Tighten the chuck by hand.
Tighten the chuck firmly by inserting the chuck
key in one of the holes in the side of the chuck
and turning it clockwise.
In order to remove a drill or screw bit, proceed
in reverse order.
Before inserting or removing a drill or
screw bit always remove the plug from
the outlet.
Mounting the side handle (fig. A)
Loosen the knob on the side handle.
Slide the side handle (6) over the chuck on the
machine.
Turn the side handle in the required position
and tighten the knob firmly.
Mounting the depth stop (fig. A)
The depth stop is used to limit the maximum
drilling depth.
Loosen the knob on the side grip.
Insert the depth stop (8) in its intended hole in
the side grip.
Set the depth stop to the required drilling
depth.
Tighten knob firmly.
Selecting the operating mode (fig. A)
Select the required operating mode before use
(drilling or hammer drilling).
For drilling in wood, metal, plastics and soft
stone and for driving screws slide the switch
(5) to the left.
For drilling in concrete or hard stone slide the
switch (5) to the right.
Always wait until the motor has come
to a complete standstill before
changing the operating mode.
ELECTRONIC HAMMER
DRILL
56020
WARNING
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in
electric shock, re and/or serious
injury. Save all warnings and
instructions for future reference.
SAFETY WARNINGS
When using the machine, always observe the
enclosed safety warnings as well as the additional
safety warnings.
The following symbols are used throughout this
manual:
Denotes risk of personal injury or
damage to the machine.
ADDITIONAL SAFETY WARNINGS FOR
ELECTRONIC HAMMER DRILLS
Personal safety
Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
ELECTRICAL SAFETY
Always check that the power supply
corresponds to the voltage on the
rating plate.
DESCRIPTION (fig. A)
Your electronic hammer drill has been designed
for drilling in wood, metal, plastic, stone and
concrete and it also has been designed for screw
driving applications.
1. On/off-switch
2. Speed adjusting wheel
3. Lock button
4. Forward/reverse switch
5. Switch hammer drill function
6. Side handle
7. Chuck
8. Depth stop
The package contains the following parts:
Electronic hammer drill
Side handle
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hyundai 56020 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hyundai 56020 in de taal/talen: Nederlands, Duits, Engels, Frans, Pools als bijlage per email.

De handleiding is 0,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info