627048
29
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
29
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
Drilling Machine Instruction Book
29
is auto-locking, but for it the surfaces of the tool taper and spindle taper must be in
contact. To get the best possible contact, the surfaces of the tool taper as well as the
spindle taper should be in good conditions. Therefore, it is advisable to handle the tool
as well as the main spindle of the machine carefully.
6. CHIPS DURING MACHINING.
The machining process removes material from the piece. This material is released in
chips, which can be of different shapes depending on the material itself. The most
common ones are of three types: fragmented chips in small bits, short helicoidal chips
and long helicoidal chips.
The chips fragmented in small bits can be rejected from the machining area and can be
dangerous if they reach the eyes of the operator. To avoid this, it is advisable to wear
safety glasses.
The long helicoidal chips tend to roll up the tool and gain considerable volume before
breaking, which is dangerous if they reach the operator as they may produce injuries.
The reached volume may also displace the drill protector from its security position,
increasing the risk of an accident. It is advisable to use chip breaking tools to machine
materials which produce such chips. For further information contact the tool
manufacturer.
Drilling Machine Instruction Book
28
reaches the tapping depth previously fixed.
3. CORRECT USE OF THE MACHINE.
The correct use of the machine involves:
Not exceeding its working capacity.
Operating the machine by qualified and trained staff and according to the points
mentioned in the instruction book.
Working under the safety systems provided with the machine, checking them and
keeping them.
Watching the safety measures mentioned in the instruction book and notices on the
machine.
Wearing clothes which provide personal protection as mentioned in the instruction
book.
Watching the safety measures which may affect work in the machine and that can be
lawfully expected, as well as those demanded in the workshops.
4. PIECE CLAMPING.
Tangential cutting forces and axial forces in the feed direction of the tool are mainly
produced during the drilling process. The tangential forces produce a moment of forces
which make the piece being drilled turn. Therefore, the pieces to be drilled (or to be
machined by one of the operations mentioned above) must be clamped in an
appropriate device such as a drillchuck and the drillchuck must be correctly clamped to
the machine table. For this reason the machine tables are provided with “T” slots.
The pieces must be clamped conveniently by some clamping device.
The clamping devices in turn must be clamped to the machine table.
The machine table is provided with “T” slots for such purpose.
5. TOOL FIXING.
The tools generally used in this machine will have parallel or tapershanks.
Drillholders are normally used to fix to the main spindle of the machine the parallel shank
tools. This fixing device has usually got three jaws, which hold the tool by the parallel
part of the shank. These are used for small drill diameters (max. up to dia. 16mm).
Bigger diameter drills, usually have taper shank of morse taper type (the ones of smaller
diameters to 16mm can also have taper shanks).
The housing in the main spindle to insert the tool is of morse taper type. It is very
important to insert the tool taper correctly in the main spindle taper to avoid the tool
falling from its housing when turning and provoke an accident.
The coupling system itself of the tool male taper in the female taper of the main spindle
l
l
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Huvema HU 40 G bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Huvema HU 40 G in de taal/talen: Engels als bijlage per email.

De handleiding is 2,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Huvema HU 40 G

Huvema HU 40 G Gebruiksaanwijzing - Nederlands - 32 pagina's

Huvema HU 40 G Gebruiksaanwijzing - Deutsch - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info