627045
4
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
4
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
Additional safety rules
Always keep in mind that:
the machine must be switched off and disconnected from the power supply during maintenance and repairs,
clamped workpieces may only be measured when the machine is switched off.
Never lean over the machine, mind loose clothing, ties, jewellery etc. and wear a cap.
Do not remove safety devices or guards. Never use the machine while a guard is open.
Always use safety glasses for machining rough materials.
Burrs and chips should only be removed using a sweeper or other aid, never with your bare hands!
Never leave the machine running unattended.
Always wear safety glasses.
2. Main specificaTions anD feaTUres
This is a general- purpose drilling machine for hole machining operation. Two sets of motions, one is the
rotational movements of the spindle in its transmission box, the other is the rotational and vertical travel
movements of the spindle box along the vertical column, fulfil the machining operations of drilling, tapping,
reaming, boring, chamfering and spotfacing on different shapes of workpieces. The gear transmission system has
been applied, Which results in the compact structure and high rigidity to meet the needs of strong force cutting
operation. The double-speed motor has led a wide speed range and very easy and safe shifting. The drilling
machine suits the needs of machinery manufacturing and various kinds of repairing applications.
3. several Usage regUlaTions
1. Carefully read this user manual before start the machine.
2. Wearing gloves is not allowed when operate this machine, contacting the spindle and tools are also
forbidden when it is running.
3. The workpiece must be safely fastened, holding it with hands when in operation is strictly objected.
4. The machine has not short – circuit protection, the user is so required to connect a 6A protection switch.
Earth protection mist be well done.
5. Whenever a failure happens, call the qualified personal to repair it.
4. main specificaTions & parameTers
Max. drilling dia. 25mm
Max. Spindle travel 150mm
Spindle hole taper Morse No.3
Spindle speed variations 8
Speed Speeds 50Hz: 100 250 345 440 690 885 1450 2900rpm
60Hz: 126 245 415 530 830 1060 1740 3480rpm
Distance between spindle centre line and
vertical column surface
225mm
Bottom base dimension 300 X 305
Max. Distance between spindle face and
bottom base
445mm
Double-speed, 3 phase 0.55/0.75KW,
50Hz: 1400/2800rpm
60Hz: 1680/3360rpm
Machine overall dimension 58X470X1000mm
Weight 170kg
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Huvema HU 25 T bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Huvema HU 25 T in de taal/talen: Engels als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Huvema HU 25 T

Huvema HU 25 T Gebruiksaanwijzing - Nederlands - 16 pagina's

Huvema HU 25 T Gebruiksaanwijzing - Deutsch - 16 pagina's

Huvema HU 25 T Gebruiksaanwijzing - Français - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info