627038
4
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
4
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED CHANG E S AND T YPI N G ERRORS RESERVED
2. aDDiTional safeTy rUles
Always keep in mind that:
the machine must be switched off and disconnected from the power supply during maintenance and repairs,
clamped workpieces may only be measured when the machine is switched off.
Never lean over the machine, mind loose clothing, ties, jewellery etc. and wear a cap.
Do not remove safety devices or guards. Never use the machine while a guard is open.
Always use safety glasses for machining rough materials.
Burrs and chips should only be removed using a sweeper or other aid, never with your bare hands!
Never leave the machine running unattended.
3. Unpacking
Before unpacking, make sure the packaging is not damaged, broken or parts of the machine are sticking out; if any
of these defects are found, contact your retailer as soon as possible.
Carefully open the packaging (pull it from the bottom to the top).
Take out and read the manual; check if the machine is complete.
Check if the machine is in good condition. There should be no damage, cracks or rust.
Clean the surface of the machine.
3.1 TransporTaTion insTrUcTion
Please refer to the machines specifications for proper machine handling. Be sure to use a suitable forklift or hoist
for lifting the machine.
Handling and transportation must be carried out by qualified personnel.
A forklift or hoist must be operated by a qualified driver.
During transaport, always keep the machine well balanced.
The machine must be lifted only vertically.
Before handling, make sure all moving parts are secured and all detacheable accessories are removed from the
machine.
Make sure the lifting straps are strong enough to hold the machine.
Make sure the machine cannot bump or crash into anything. This will influence machine precision and may
damage the electronic control.
Always wear safety glasses!
Typical lifting strap position.
1-3. Setting the machine instruction:
1.The machine base with setting hole will be set on concrete floor.
The outlined procedures of setting the machine
MODEL
SETTED SCREW
JS-834
M12
JS-834V
M12
JS-840VB
M12
2.The dimension of setting hole:
Consider existing and anticipated needs, size of material to be processed through each machine, and
space for auxiliary stands, work tables or other machinery when establishing a location for your
machine. See Figure 01.
JS-834/834V/840VBDimensions(m/m)
JS-834/834V
A=1000
B=560
JS-840VB
A=1050
B=580
2
Lifting Straps
Figure 01
Figure 1
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Huvema HU 20F SUPER bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Huvema HU 20F SUPER in de taal/talen: Engels als bijlage per email.

De handleiding is 2,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Huvema HU 20F SUPER

Huvema HU 20F SUPER Gebruiksaanwijzing - Nederlands - 16 pagina's

Huvema HU 20F SUPER Gebruiksaanwijzing - Deutsch - 16 pagina's

Huvema HU 20F SUPER Gebruiksaanwijzing - Français - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info